Matsushita CF-18NHHZXBM service manual Reassembly Instructions, Setting up the LCD Unit

￿ ￿ (0~0.5mm)

Hide the hook of the LCD FRAME.

(0~0.5mm)

Fit Holder Sheet&LCD Back Cushion Side￿ to the rightside end of LCD FRAME.

LCD Side Cushion D

LCD Side Cushion C

LCD Back Cushion Side

7.2.Reassembly Instructions

7.2.1.Attention when CF-18 series is repaired

•Please execute writing BIOS ID when you exchange the Main Board.

•Parts (Sheet and rubber) etc. related various the Conductive Cloth and Heat Spreader cannot be recycled. Use new parts.

7.2.2.Setting up the LCD UNIT

1.Set the LCD UNIT to the LCD FRONT CABINET/TS PANEL.

2.Fix the LCD Back Damper using the 2 Screws. <Z>

3.Set the TS PS2 PCB on the LCD Back Damper, and con- nect the 2 Cables to the Connectors (CN900 and CN901).

4.Set the INVERTER PCB to the LCD Back Damper, and connect the 2 Cables to the Connectors (CN1 and CN2).

Screws <Z> :DXHM0042ZA

Inverter Case

Connector (CN2)

Inverter PCB

Connector (CN1)

Connector (CN901)

TS PS2 PCB

Connector (CN900)

!Assembly of LCD Back Damper (Applicable Model : Touch Screen Model)

LCD Back Cushion S

Set the LCD Back Dumper,￿ and then screw it.￿

￿￿

￿Screw<Z>

Detail of "A"

0~3mm

A

0~0.5mm

	Detail of "B"		Detail of "C"	Detail of "D"
	0~1mm		0~1mm	0~1mm
				0~0.5mm
	Pass the Cable under￿		Pass the Cable￿	Pass the Cable under￿
B	the protrusion.￿	0~0.5mm	through the space.1~1￿.5mm	the protrusion.￿
	￿	C	￿	￿
			LCD Back Cushion L	D

				￿ ￿
		LCD Back Cushion S		Set the LCD Back Dumper,￿
				and then screw it.￿
				￿ Screw<Z>
	LCD Back Dumper			0~0.5mm
	Remove the Release￿￿ Paper￿￿		Holder Sheet
Holder Sheet
	on the back side and attach￿it.￿
	Crosswise:￿	Match to the middle line.￿		0~0.5mm
	￿Lengthwise: Match to the LCD Frame.￿

LCD Back Cushion Side￿

￿ ￿￿￿ (0~0.5mm)

Hide the hook of the LCD FRAME.

LCD Side Cushion A
Attach it to the side surface of the Frame.￿
(Match to the end of the Frame￿	(0~0.5mm)
within 0 to 0.5 mm at the far side.)￿	Fit Holder Sheet&LCD Back Cushion Side￿
￿	to the leftside end of LCD FRAME.

LCD PCB SPACER ASSY

Insert this between LCD PCB & LCD FARME.

			Screw<Z>
			Screw the Board￿
			and the Spacer together.￿
			￿
LCD PCB SPACER ASSY		Spacer Sheet
Spacer Sheet	LCD PCB Spacer
	Asymmetric shape￿

The￿ form of the left and the right isn't symmetrical.

LCD Side Cushion C

0±0.5mm

0±0.5mm

0±0.5mm 0±0.5mm

Screw<Z>

Screw the Board￿

￿ ￿

and the Spacer together.￿

￿

0±0.5mm

0±0.5mm

7-7