Matsushita CF-18NHHZXBM Removing the Speaker Angle and Dimm Lid, Removing the Rear Cabinet, Kbd

3. Remove the KBD Plate.

1

2

Keyboard

4.Lift the far side of the Keyboard and slide it to backward, and then turn the Keyboard over frontward.

<C>

KBD￿

Connector￿

Cover

9.Remove the TP Tape.

10.Disconnect the Cable from Connector (CN800).

11.Remove the Touch Pad and Click Button Plate.

Screws <B>:DRSB2+5FKL

Screws <C>:DFHE5025XA

7.1.4.Removing the Speaker Angle and DIMM Lid

	<D>
<E>	<D>	<D>
<D>		<E>	DIMM Lid
Speaker			DIMM LID Sheet
Waterproof
Sheet
Speaker Unit

Speaker Washer

Speaker Cable

Tube

Speaker Angle

Connector (CN37)

5.Remove the three Screws <C>.

6.Remove the KBD Connector Cover.

Keyboard

Keyboard

FPC

TP Tape

Touch Pad

Click Button

Plate

1.Remove the four Screws <D>.

2.Disconnect the Cable from Connector (CN37).

3.Remove the DIMM Lid.

4.Remove the two Screws <E>.

5.Remove the Speaker Angle.

Screws <D>: DRQT2+D2FKL

Screws <E>: DRHM5025YA

7.1.5.Removing the Rear Cabinet

<F>
<F>
<F>	<F>
	<F>
<F>	<F>	<F>
<F>
<F>		<F>
<F>
	<F>

	Connector	Connector	1.	Remove the thirteen Screws <F>.
	(CN800)	(CN18)	2.	Open the LID Rubbers.
7.	Disconnect the Cable from Connector (CN18).		3.	Remove the Rear Cabinet.
8.	Remove the Keyboard.		Screws <F>:DRHM0061ZA

7-2