Matsushita CF-18NHHZXBM service manual Removing the Battery Pack and HDD Pack, Hdd Fpc

7 Disassembly/Reassembly

Note:

Power off the computer. Do not shut down to the Suspend or hibernation mode.

Do not add peripherals while the computer is in the Suspend or hibernation mode; abnormal operation may result.

7.1.Disassembly Instructions

7.1.1.Preparation

Before disassembling, be sure to make the following prepara- tions.

•Shut down Windows and turn off the power.

•Disconnect the AC adaptor.

•Remove the optional DIMM memory card and PCMCIA card if they are connected.

•Remove other devices if they are connected.

Attention:

•Please execute writing BIOS ID when you exchange the Main Board.

•Parts (Sheet and rubber) etc. related various the Conductive Cloth and Heat Spreader cannot be recycled. Use new parts.

7.1.2.Removing the Battery Pack and HDD Pack

4. Remove the HDD Pack.

HDD Case B

Hooks

HDD FPC

HDD

Hooks

Heater

<A>

<A>

1	3
2

HDD Case A

5.Remove the two Screws <A>.

6.Remove the HDD Case A and the HDD Case B.

7.Remove the HDD.

Screws <A>:DFHE5025XA

7.1.3. Removing the Touch Pad and Key- board

KBD Plate

	<B>
	<B>	KBD Plate
Palm Rest Ass'y		<B>
		<B>

HDD Pack

Battery Pack

1. Open the Battery Cover.

2. Remove the Battery Pack.

3. Open the HDD Cover.

1. Remove the Palm Rest Ass'y.

Note:

The Palm Rest Ass'y is firmly fixed with two-sided tape.

Carefully remove the Palm Top Cover Sheet not to damage it.

2. Remove the four Screws <B>.

7-1