Disassembly Procedures
!WARNING
To avoid risk of electrical shock, personal injury or death; disconnect power to unit before servicing.
5. Remove 19mm nut .
NOTE: When reinstalling Motor torqe nut to
6.Grasp the Rotor at 3 and 9 o’clock while pulling Rotor from shaft.
CAUTION: The rotor contains powerful magnets. Use caution during handeling and installation. DO NOT place fingers between rotor and windings during installation.
7.Depress and release latch to remove motor wiring connectors.
7.Depress and release latch to remove motor wiring connectors.
8.Remove the six 10mm bolts securing stator coil to the tub.
NOTE: There are alignment pins for the Stator reinstallation. Use caution during removal and installtion, the stastor will not hang from the alignment pins. Start a screw while supporting the Stator with the other hand.
34 | 16025909 Rev. 0 |
©2005 Maytag Services
