Component Testing Information
!WARNING
To avoid risk of electrical shock, personal injury or death, disconnect power to unit before servicing, unless testing requires power.
9 | 1 |
|
|
|
|
CN3 |
|
|
|
|
|
|
|
| CN6 | 3 | 1 |
4 | 1 | CN9 |
|
|
|
CN8 |
|
|
|
|
|
8 | 5 | 3 | 1 |
| CN7 |
CN10 4 |
|
| |||
1 |
|
| |||
| RY9 | 2 |
| ||
|
|
| 1 |
| |
|
|
|
|
|
|
|
| 1 | 4 |
1 | 9 | 8 | 1 |
| |||
|
| 4 | 1 |
1 3
2
3
2 1
ATC Control
When ATC cold wash is selected, the Heater turns on if the water temperature in the tub is below 60 degrees F. The heater turns off when the water temperature is above 70 degrees F or time has expired for the wash cycle. The cycle time will not be extended to reach the desired temperature.
When ATC warm wash is selected, the heater turns on if the water temperature in the tub is below 95 degrees F. The heater will turn off when the water temperature is above 105 degrees F or time has expired for the wash cycle. The cycle time will not be extended to reach the desired temperature.
22
When hot wash is selected, the heater will turn on if the water temperature in the tub is below 120 degrees F. The heater turns off when the water temperature is above 130 degrees F. or or time has expired for the wash cycle. The cycle time will not be extended to reach the desired temperature.
When the Sanitary Cycle is selected, the heater turns on if the water temperature in the tub is below 141 degrees F. The heater turns off when the water temperature is above 151 degrees F. The wash cycle will be extended to achieve the temperature of 151 degrees F.
©2005 Maytag Services
