Disassembly Procedures
!WARNING
To avoid risk of electrical shock, personal injury or death; disconnect power to unit before servicing.
Top Removal
1.Disconnect power supply to unit.
2.Remove 2 10mm screws from washer back.
3.Slide Top Cover towards the rear to clear the screw head from flange on the bottom side of the Top Cover.
Water Level Sensor Removal
1.Disconnect power supply to unit.
2.Remove Top Cover.
3.Remove harness plug.
4.Remove Pressure Hose.
5.Remove single attachment screw.
26 | 16025909 Rev. 0 |
©2005 Maytag Services
