Disassembly Procedures
!WARNING
To avoid risk of electrical shock, personal injury or death; disconnect power to unit before servicing.
8. Lift Front Panel from bottom brackets.
NOTE: When installing the boot align the index tabs on the boot with the screws on either side of the Fill Tube.
Heater Removal
1. Disconnect power supply to unit.
2. Remove Top Cover.
3. Remove Console.
4. Remove Front Panel.
5. Remove Thermistor and Heater wiring connectors.
Boot Removal
1.Disconnect power supply to unit.
2.Remove Top Cover.
3. Remove Console.
4. Remove Front Panel.
5. Loosen boot clamp at the 12 o’clock position.
6. Loosen 10mm nut on Heater and remove Heater Element.
NOTE: Install Heater Element on top of metal bracket.
32 | 16025909 Rev. 0 | ©2005 Maytag Services |
