OperatingInstructions
60
Static
•IPAddress
• Subnet Mask
• Check [Static], whenhaving specified IP address
assigned to Network Camerafrom your ISP or
administrator.Enter the specified IP addressand Subnet
Mask.
• If you use Network Camera on the LAN, set up in the
same class as your PC is in.
Refer to page 25 forthe class.
• Refer to page104 for the IP addressing.
DHCP
• Host Name
• Check [DHCP] (Dynamic Host Configuration Protocol),
when your ISP uses the DHCP server function which
assigns an IP address to Network Camer a automatically.
Enter the Hostname. Follow the instructions of your ISP
or administrator forthe Host name.
• Refer to unavailablecharacter set 1 in page 104 for the
Host name.
Default Gateway*a• Ifyou have the specified DefaultGateway address from
your ISP or administrator,enter it in this data field.
• Refer to page104 for the IP addressing.
DNS Server*a• Set DNS server address when you use HostName to
register Network Camera on Multi-Camerawindow on
page 85.
• If you havethe specified DNS server address from your
ISP or administrator, enter it in this da ta field. Youcan set
up two DNS server addresses.
• Refer to page104 for the IP addressing.
Instructions for the data fields