Suggested, Having reached the selected end | Panasonic KX-HCM250

Operating Instructions

		Instructions for the data fields

	White Balance	Notes
		• The wrong White Balance setting will cause Network
		Camera to display colors improperly. In most cases Auto is
		suggested.
		• White Balance is also registered in preset programming.

	Power Line	It can select Flicker Correction by power line frequency.
	Frequency	• 60 Hz (default) • 50 Hz
		• 60 Hz (default) • 50 Hz
		Select 60 Hz in the United States.

	Brightness	Brightness Control can be locked.
	Control	Locked appears on the operation bar on page 46 when clicking.


	Pan/Tilt/Preset	Pan/Tilt/Preset Control can be locked. Pan/Tilt/Preset Control
	Control	also disables Click to Center operation.
		Locked appears on the operation bar on page 46 when clicking.

	Preset	Preset Program Control can be locked.
	Program	Program button disappears on the operation bar on page 46.
	Control	Program button disappears on the operation bar on page 46.
	Control

	Pan Range	Pan Range can be selected. Refer to page 84 on specifying the
		Pan/Tilt range.
		Right/Left End appears on the operation bar on page 46 when
		having reached the selected end.

	Tilt Range	Tilt Range can be selected. Refer to page 84 on specifying the Pan/
		Tilt range.
		Up/Down End appears on the operation bar on page 46 when
		having reached the selected end.

[For assistance, please call: 1-800-272-7033]

83

Image 83

Panasonic KX-HCM250 Suggested, White Balance is also registered in preset programming, Having reached the selected end

Contents

Network Camera For operation assistance Call Introduction For assistance, please call TrademarksNetwork Camera Memo Important Safety Instructions Table of Contents Index 129 Specifications and Troubleshooting 107Technical Guides Section Getting to Know Network Camera Main Features External I/O Input/Output Multi Client AccessUpdate Firmware Authentication System Requirements Authentication window Authentication-System Security Feature Flexible Stand 1 pc Included AccessoriesSetup CD-ROM 1 pc AC Adaptor 1 pc Setup CD-ROM Front View Camera Feature LocationsIndicator Refer to page 88 for the setup Bottom View Rear View Network Camera Setup Installation Procedure Type 2-Internet Connection with a Broadband Router Network Camera Configuration TypeNetwork Camera can be installed on the LAN/Intranet Type 4-Direct Connection with a PC Type 3-Internet Direct Connection with a Modem How to turn on Network Camera for Installation Network parameters memo for Network Camera Network ParametersPreparing the Network Parameters for Network Camera Type Port No Network Camera Configuration TypeDefault Network Parameters Table Click OK to close IP Configuration window How to refer the network parameters from the PC Setting IP Address of the PC in Type 4 Configuration Type Private IP address Proxy Server Setting Operating Instructions Simple Installation using the Setup CD-ROM Operating Instructions Operating Instructions Click the language to change the display To set up the wireless network parameters Wireless SetupTo access Network window Channel Connection and Signal Strength statusSet Infrastructure Default or AdHoc Encryption Key window Encryption Password window Wireless Settings Default Key If Top Page does not appear Port Forwarding IP Masquerade feature Network Camera Access from the Internet Top Network Camera Screen and Setup Window Network Camera Flow Chart Http//Global IP address of Broadband RouterPortNo Top TopExample Help Motion JpegSingle Camera Multi-Camera ActiveX Controls Single Camera Screen Click to Center Using Operation Bar Using Pan/Tilt Operation Setting Preset Positioning and Home Positioning Click Delete Deleting the preset buttons Viewing Buffered Image Screen Non Transfer mode Alarm/Timer mode Secondary ViewerClicking Start Capture Primary Multi-Camera Screen Setup Setup Name/Time AdministratorCamera Setup Go to Top Functions of Network Camera Entered. If any operational issues are changed, tryThis option first. Refer to Go to Top Network Enter only the number Instructions for the data fields Or administrator for the Host name If you use Network Camera on the LAN, set upCheck Dhcp Dynamic Host Configuration Protocol Host Name When your ISP uses the Dhcp server function which File size of the image Date Name/TimeCamera Name Time Zone AdjustmentTime Changed AM/PM or 24H Auto Click Security Administrator on Setup Security AdministratorRefer to page 65 for details about authentication security Retype EnableAdministrator and General User Authentication window For Setup Password Security General User Click Security General User on Setup Operating Instructions Top View Image 160 x ResolutionInstructions for the data fields Top Image Image Transfer Non Transfer mode Click Alarm on Image Transfer window Transfer in the Alarm Mode Active Time of Trigger Alarm enable condition Login timing Data transfer method Over write setting Setting Example Setting explanation Transfer in the Timer Mode Image Frequency Sets the interval to send the image Buffers or transfers by the timer trigger Login timing Over write setting Fixed Camera SetupInstructions for the data fields White Balance Fixed Indoor Tilt Range White Balance is also registered in preset programmingSuggested Having reached the selected end Specifying the Pan/Tilt range Click Save when finished Multi-Camera Camera Name Enable check boxIP Address or URL * 1 or Host External Output Control Click External Output Control on Setup Indicator Control Status Click Restart Now Click Cancel to quit. The window returns to SetupRestart Update Firmware Click Update Firmware Click Update Firmware on Setup Open Reset to Factory Default Technical Guides High performance for wireless communication Network Camera Installation Thread the AC adaptor cord through the hook before mounting Network Camera MountingHook for AC adaptor cord Wall Mounting Ceiling Mounting Flexible Stand Mounting Tripod Mounting Attach Network Camera to the tripod by using the tripod bolt Tape Customer provided 100 Wall Mounting Ceiling Mounting External Sensor Input Interfacing to the External I/OExplanation of External I/O Pin Function Circuit Diagram Example 104 Ascii and ISO-8859-1 Character TableUnavailable character set Space, , , #, &, %, =, +, ?, , and are not available For assistance, please call 105 Displayable character set 106 Maintenance For assistance, please call 107 Specifications and Troubleshooting Network Camera Reset Procedure-Default Settings For assistance, please call 109 Default Settings List 110 For assistance, please call 111 Items Factory Default Indispensable setting Value Alarm 112 Timer 113 ForCall 114 Control Indicator Control Other Specification Description SpecificationsNetwork Camera Specifications Description AC adaptor Input 120 V AC, 60 Hz Weight 530 1.17 lb. Only the unitMm 3.46 inches Excluding the antenna and protruding objects Problem Cause and Remedy TroubleshootingAbout Network Camera Setup For Indicator Control window Transfers older Network window on Firmware has About Network Camera Setup Problem Cause and RemedyUpdate Refer to page 91 for the Update Firmware 120 Lens About Top View Image screen About Other Troubles View Image Setting window on Confirmation of Network Camera Operation Click the language to change the display FCC and Other Information Medical Ieee 802.11b GlossaryAdHoc Encryption WEP 128 129 Index Operating Instructions TCP/IP When you ship the product For product service