OperatingInstructions
62
3.5.3 Name/Time
Name/Time window is used to assign a nameto each Network Camera. Date
and Time entered on Name/Time windoware used for the Alarm/Timer mode in
the Image Transfer feature and on the BufferedImage screen. NTP automatically
adjusts the internal clockof Network Camera.
1. Click [Name/Time]on Setup Page.
2. Enter the Camera Name and Date and Time. Click [Save]when finished.
•Click[Cancel]to quit thecurrent settings. The window returns to Setup
Page without savingthe parameters.
Instructions for the datafields
Camera
Name
The Camera Name appears on the Single Camerascreen.
• Refer to unavailablecharacter set 1 on page 104.
• Refer to displayablecharacter set on page 105.
Date and
Time
First click[AM/PM]or [24H]. The display changes in each time
mode.
Note
Time setting will be affected by the temperature. Time
setting may lose one minute per month in 25 °C (77 °F)
condition. Use Auto Adjustment featu re.