Operating Instructions

2.3How to turn on Network Camera for Installation

Network Camera is powered up when connecting AC plug to the power outlet.

1.Connect Category 5 straight/cross cable to the Ethernet port of Network Camera to the hub or PC.

Connect Ethernet cable first to make Network Camera recognize the wired communication.

2.Connect the DC plug of the AC adaptor to the DC IN jack and the AC plug of the AC adaptor to the power outlet to turn on Network Camera. Indicator blinks and the Pan/Tilt moves to the center position.

AC adaptor

Power

Outlet

DC IN

jack

Ethernet port

2.

 

1.

 

DC Plug

To Network

Category 5 straight/cross cable

 

Notes

AC adaptor is used as the main disconnect device, so ensure that the power outlet is located/installed near the equipment and is easily accessible.

Use only the specified Panasonic AC adaptor PSLP1233 (Order No. PSLP1233Z).

When you set up Network Camera in [Type 3], connect it temporarily in [Type 1], [Type 2] or [Type 4].

When Indicator is orange, ensure that the Ethernet cable is properly connected, or PC, Ethernet hub or broadband router is properly working.

20

Page 20
Image 20
Panasonic KX-HCM250 operating instructions How to turn on Network Camera for Installation