Panasonic KX-HCM250 operating instructions For Indicator Control window

Operating Instructions

		About Network Camera Setup
Problem		Cause and Remedy
When Top Page	•	Enter the correct IP address in the web browser.
does not	•	IP address and Subnet Mask of the PC and the Network
appear.
		Camera must be in the same class of the private IP address on
		the LAN. Refer to page 25.
	•	The network congestion prevents Top Page from appearing
		quickly. Wait for a while.
	•	A proxy server may prevent you from connecting directly to
		Network Camera, set up not to use the proxy server. Refer to
		page 26 for details.
	•	When Top Page does not appear, port number 80 might not be
		available. Ask your ISP for the available port number.
	•	When you use DDNS, you need to set Default Gateway and
		DNS server address. Refer to page 58 for Network window.
	•	If Top Page does not appear in the above procedure, press the
		CLEAR SETTING button and set up with the Setup CD-ROM
		again.
	•	The procedure on page 123 can be established if Network
		Camera has a defect.
When forgetting	Check an IP address by using the Setup CD-ROM. Network
the IP address	Camera List window on page 29 can tell you the IP address of
of the Network	Network Camera.
Camera.
When forgetting	Follow the steps below.
the password to	1.	Initialize Network Camera by pressing the CLEAR SETTING
access Setup		button.
Page.
	2.
		Reconfigure Network Camera.
Indicator does	•	Confirm that the standard AC adaptor PSLP1233 (Order No.
not light up.		PSLP1233Z) is used.
	•	Confirm that the Indicator Control is disabled. Refer to page 88
		for Indicator Control window.
Indicator is	•	Ethernet cable is not connected properly.
orange.	•	PC, Ethernet hub or broadband router is not working.

118