Operating Instructions
[For assistance,please call: 1-800-272-7033] 23
How to refer the networkparameters from the PC
If youcannot get the network parameters, you can referto the network parameters
exceptfor IP address from the PC on the same network in the followingprocedure.
•When using Windows 95,Windows98 or Windows Me
1. Click [Start]–> [Run...].Run window appears.
These steps are slightly differentdepending on the operating system.
2. Enter "winipcfg"andclick[OK].IP configuration window appears.
3. Select the proper Ethernet adaptorand click [More Info].
4. Click [OK]to close IP Configurationwindow.
•When using Windows NT,Windows2000 or Windows XP
1. Click [Start]–> [Program](–> [Accessories])–>[MS-DOS®(Command)
Prompt].MS-DOS Promptwindow opens. These steps are slightly different
depending on the operatingsystem.
2. Enter "ipconfig /all" and press[Enter].
3. Enter "exit" and press [Enter]to close the window.