Panasonic KX-HCM250 Confirmation of Network Camera Operation, TCP/IP Properties Table

Operating Instructions

5.5Confirmation of Network Camera Operation

This procedure checks the Network Camera operation. IP address of the PC has to be on the same network to be able to access Network Camera. If Top Page appears, Network Camera has no defect.

1.Push the CLEAR SETTING button as illustrated on page 108. All settings on Network Camera will be set to default.

2.Connect locally between the PC and Network Camera like [Type 1] or [Type 4] configuration type shown on page 18 and page 19.

3.Follow the next steps distinguished by the operating system in the next table to open TCP/IP Properties window.

	TCP/IP Properties Table
Operating	Steps
System
Windows 95	[Start] –>[Settings] –>[Control Panel] –>[Network] –>
Windows 98	Select [TCP/IP] with adaptor in use –>[Properties] –>
Windows Me	[Specify an IP address]
Windows NT	[Start] –>[Settings] –>[Control Panel] –>[Network] –>
	[Protocols] tab –>[TCP/IP Protocol] –>[Properties] –>
	Select [Adaptor] in use –>[Specify an IP address]
Windows	[Start] –>[Settings] –>[Control Panel] –>[Network and
2000	Dial-up Connections] –>[Local Area Connection Icon] in
	use –>[Properties] –>Select Internet Protocol [TCP/IP]
	–>[Properties] –>[Use the following IP address]
Windows XP	[Start] (–>[Settings]) –>[Control Panel] –>[Network and
	Internet Connections] –>[Network Connections] –>
	[Local Area Connection Icon] in use –>[Properties] –>
	Select Internet Protocol [TCP/IP] –>[Properties] –>[Use
	the following IP address]

Note

When using Windows NT, Windows 2000 and Windows XP, log on as an administrator to access TCP/IP Properties window.

[For assistance, please call: 1-800-272-7033] 123