3. Ethernet indicator LED
Flashes green when the mounted tablet is connected to a network via an Ethernet cable.
4. Dock alignment pins (bottom)
These pins support tablet mounting onto the docking station. Align and slide these pins into the docking pin ports located on the tablet to mount the tablet to the docking station. For more information on how to mount the tablet onto the docking station, refer to Chapter 3.
5. Battery Screw
Loosen the battery thumb screw to remove battery from the docking station battery compartment. Tighten the battery thumb screw to secure a battery into the docking station battery compartment.
6. Dock alignment pins (top)
These pins support tablet mounting onto the docking station. Align and slide these pins into the docking pin ports located on the tablet to mount the tablet to the docking station. For more information on how to mount the tablet onto the docking station, refer to Chapter 3.
7. Dock lock
Turn this accordingly to lock/unlock a mounted tablet onto the docking station. When in the ‘locked’ position, pressing the dock release button will not release the tablet from the dock.
8. Dock release button
Press this button to remove the tablet from the docking station. Turning the dock lock to ‘locked’ position will disable this functionality.
9. Dock-Tablet connector
When the tablet is mounted properly onto the Elo Tablet Dock, this connector connects with the
10. Dock battery compartment
To access the dock battery compartment, remove the dock battery compartment door (by loosening its screw) that comes with the docking station. Use this battery compartment to charge a spare battery via the dock. The docking station is designed to allow simultaneous charging of a spare battery mounted in this battery compartment and a tablet mounted onto the docking station.
11. Dock cable cover
Remove dock cable cover to access the USB ports, Ethernet port, and VGA located behind the
User Manual: Elo® Tablet SW602113 Rev C, Page 15 of 59