User Manual: Elo® Tablet
SW602113 Rev C, Page 20 of 59
If possible, place your tablet in a dry, well-ventilated area without direct exposure to sunshine.
Do not use or store your tablet in dusty, dirty areas, or extreme hot or cold areas.
Chapter 2: Getting Started Unpacking the Tablet
To unpack the tablet:
1. Open the box.
2. Check that the following items are present and in good condition:
Tablet
Quick Install Guide
AC/DC Power adapter kit
o AC/DC power adapter w/ DC power cable
o Charger plug adapter for North America, Europe/Korea, and U.K.
Battery
3. Remove the protection bag/cover, desiccant packs, and other packaging materials
appropriately. Please take extra caution to ensure they are not accessible by small
children.
4. Press the power button to start using the tablet. The tablet may need to be charged before
initial use. We recommend that the tablet be charged for at least 2.5 hours prior to initial
use.
Installing the Battery into your Tablet
To install the battery into the tablet, slide battery into the battery compartment. Tighten the
battery screw to properly secure the battery to the tablet.
The tablet battery is designed for easy installation and removal by end users. Turn off and shut
down the tablet before removing the battery. The battery can be removed by loosening the
battery screw on the back of the tablet. When the tablet is powered by and plugged to the power
supply, the battery may be replaced without turning off the tablet.
Additional batteries are available for purchase (P/N E840851).
Charging your Tablet and/or Battery
Setting up the AC/DC Power adapter kit:
Push the release button on the AC/DC Power adapter head, and slide out the protective