management support. Touch / select “Properties”. This will open the Wireless Network Connection Properties window.
-Touch / select “Configure”.
-On the Power Management tab, check / uncheck the “Allow the computer to turn off this device to save power” check box to enable / disable power management on the network adapter.
-Check / uncheck the “Allow this device to wake the computer” to enable / disable Wake on LAN. Check “Only allow a magic packet to wake the computer” check box to only enable
Wake on LAN for magic packets. Touch / select “OK”.
Note: For devices that do not support ARP and NS offloads, Windows will default to wake only on magic packet.
Charging Battery
Use only the AC/DC power adapter kit supplied by Elo Touch Solutions to charge the tablet and its battery. The tablet battery has a ‘charging threshold’, and will only charge once it falls below this threshold level. The threshold level of the tablet battery has been set to 90% by default.
Once the battery falls below this threshold limit, the battery can be charged back to 100%.
The tablet has a battery indicator LED that shows the charging status of the tablet battery. This light emitting diode will:
-Display solid green light when the battery is fully charged
-Flash amber light when the battery is charging.
In the event that the tablet battery was allowed to fully discharge, it is recommended to recharge the battery to at least 80%. To prevent
Audio
Audio can be played over the tablet internal speaker. When headphones are plugged into the tablet audio jack, the internal speaker turns off and audio is played over the headphones. When external microphones are plugged into the tablet audio jack, the internal microphone will turn off.
User Manual: Elo® Tablet SW602113 Rev C, Page 48 of 59
