White Outdoor 500 manual Final Adjustments, Lamp Wire optional, Chute Clean-Out Tool

Page 6

3.One end of each chute keeper is already attached to the chute flange. Pivot the free end of the chute keeper to align it with the chute flange and push it till it snaps into position. See Figure 4. Repeat with remaining chute keepers.

Chute

Assembly

3

Chute Keeper

Figure 4

For Models with 4 Way Chute Control Box

1.Pull the hairpin clip out of the clevis pin on the chute support tube. Save this hardware. See Figure 5.

Hairpin Clip

4 Way

Chute

 

 

Control

 

Box

 

Clevis

 

Pin

 

Chute Support

 

Tube

Figure 5

Cables

Short

Tube

Chute Support

Tube

Figure 6

2.Position the chute assembly so the chute opening is facing the front of the unit.

3.Place the chute control box on the short tube of the chute assembly and the chute support tube of the

chute assembly as shown in Figure 6, cables should be towards the operator.

4.Insert the clevis pin, earlier removed, through the holes on the chute control box and chute support tube. Secure with the hairpin clip. See Figure 5.

For All Models without Engine Covers

1.Slip the cables, running from the chute to the handle panel into the cable guide located on top of the engine. See Figure 7 .

Cable Guide

Figure 7

Lamp Wire (optional)

1.Wrap the wire from the lamp down the right handle as shown in Figure 8 .

2.Plug wire into the alternator lead wire under the fuel tank. See Figure 8 inset.

Alternator Lead

Alternator

Lead

Lamp Wire

NOTE: Wheels are omitted from illustration for clarity.

Figure 8

Chute Clean-Out Tool

1.The chute clean-out tool is fastened with a cable tie to the rear of the auger housing for shipping purposes. Cut the cable tie and remove the extension cord (optional) before operating the snow thrower.

Final Adjustments

After setting up your snow thrower, check the adjustments as instructed below and make any final adjustments necessary before operating the unit.

CAUTION: Perform the following test before operating the snow thrower for the first time and at the start of each winter season. Failure to comply with these adjustment instructions may cause damage to the unit.

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Operator’s Manual Table of Contents Important Safe Operation Practices TrainingMaintenance And Storage Your ResponsibilitySetting up the Snow Thrower Setting UP Your Snow ThrowerBefore Assembly UnpackingChute Clean-Out Tool Final AdjustmentsLamp Wire optional For Models with 4 Way Chute Control BoxAuger Control Test Drive Control & Shift LeverSkid Shoe Tire Pressure Pneumatic Tires Operating Your Snow ThrowerKnow The Controls Drive Control/ Auger Control LockStopping Snow Thrower Before Starting Gas & Oil Fill-UpStarting The Engine Cold Start Electric StarterRecoil Starter Warm StartTo Engage Drive Before StoppingTo Stop The Snow Thrower To Engage AugersGeneral Recommendations Chute Clean-Out ToolMaintaining Your Snow Thrower EngineCheck Friction Wheel Service & AdjustmentCheck V-Belts Check Chute CablesReplacing Skid Shoe Replacing BeltShave Plate and Skid Shoes Auger BeltFriction Wheel Rubber Drive BeltAuger Clutch AdjustmentsDrive Clutch Shift RodOFF-SEASON Storage Chute ControlTroubleshooting Three 3 Year Limited Warranty Tractor Attachment Warranty
Related manuals
Manual 16 pages 26.46 Kb

500 specifications

The White Outdoor 500 is a rugged and versatile lawn and garden tractor designed for homeowners looking to tackle a variety of outdoor tasks with ease. Renowned for its robust construction and reliable performance, the White Outdoor 500 is equipped with a host of features that make it a valuable addition to any landscape maintenance arsenal.

One of the standout features of the White Outdoor 500 is its powerful engine, typically powered by a dependable Briggs & Stratton or Kohler engine. This engine provides ample horsepower to handle a wide range of conditions, from mowing grassy lawns to tackling tougher terrain and heavy gardening tasks. The engine is designed for easy starting and efficient fuel consumption, ensuring that homeowners can complete their tasks without frequent interruptions for refueling.

The tractor is equipped with a hydrostatic transmission, offering seamless acceleration and smooth operation. This user-friendly system allows operators to easily control speed and direction without the need for shifting gears, enabling a more comfortable mowing experience. The tractor's design promotes maneuverability, making it suitable for navigating around obstacles like trees and flower beds.

Another key characteristic of the White Outdoor 500 is its cutting deck. The tractor typically features a wide, multi-blade cutting system that ensures a clean and even cut across various grass types and lengths. Many models include adjustable cutting heights, allowing users to customize their lawn care according to seasonal requirements or personal preferences. The robust construction of the deck ensures durability, even under the rigors of regular use.

The White Outdoor 500 also prioritizes comfort and ease of use. With an ergonomic seat design, users can enjoy extended mowing sessions without experiencing fatigue. The placement of controls is intuitive, making it easy to operate various functions like headlights, deck engagement, and throttle adjustments.

In addition, the tractor often features advanced technologies such as a built-in mulching system and bagging capabilities that allow homeowners to collect clippings for easy disposal or recycling. As a result, maintaining a tidy lawn becomes a simple affair.

Overall, the White Outdoor 500 is a reliable and efficient lawn tractor that combines power, comfort, and advanced features for a superior mowing experience, making it a popular choice among homeowners looking for a dependable solution to their outdoor maintenance needs.
Top Page Image Contents