White Outdoor LT-542K, LT-942K, LT-946K manual Ignition Switch Module, Drive Pedal

Page 12

Ignition Switch Module

WARNING: Never leave a running machine unattended. Always disengage PTO, move shift lever into neutral position, set parking brake, stop engine and remove key to prevent unintended starting.

To start the engine, insert the key into the ignition switch and turn clockwise to the START position. Release the key into the NORMAL MOWING MODE position once the engine has fired.

To stop the engine, turn the ignition key counterclockwise to the STOP position. See Figure 8.

Normal

Driving

Mode

Stop

Position

Start

Position

Figure 8

IMPORTANT: Prior to operating the tractor, refer to both Safety Interlock Switches, page 14 and Starting The Engine, page 15 of this manual for detailed instructions regarding the Ignition Switch Module and operating the tractor in

REVERSE CAUTION MODE.

Drive Pedal

The drive pedal is located below the brake pedal on the right front side of the tractor along the running board. Depress the drive pedal with your right foot when the tractor shift lever is in either FORWARD or REVERSE to cause the tractor to move. Ground speed is also controlled with the drive pedal. The further

down the pedal is depressed, the faster the tractor will travel. The pedal will return to its original position when it’s not depressed.

IMPORTANT: Always set the parking brake when leaving the tractor unattended.

Systems Indicator Monitor

LCD

Located in the center of the tractor’s console, the systems indicator monitor records, and displays on its LCD, hours of tractor operation whenever the ignition key is rotated out of the STOP position.

The indicator Monitor will also remind the oeprator of maintenacne intervals for chaning the engine oil. The LCD will alternately flash the recorded hours, “CHG” and “OIL” for five minutes, after every 50 hours of recorded operation elapse. The maintenance interval lasts for two hours (from 50-52, 100-102, 150-152, etc.). The LCD will also flash as described above for five minutes every time the tractor’s engine has been started during this maintenance interval. Befor the interval expires, change the crankcase oil level as instructed in this Operator’s Manual.

{Ó°äÊ

Figure 9

If the Brake light or PTO light illuminates when attempting to start the unit, proceed as follows:

BRAKE — Depress the brake pedal.

PTO — Move PTO (Blade Engage) lever, or PTO (Blade Engage) knob into the disengaged (OFF) position.

NOTE: It is normal for the Oil light and the Battery light to illuminate while the engine is cranking, but if either illuminate’s while the engine is running, proceed as follows:

OIL— Stop the tractor immediately and check the crankcase oil level as instructed in the Engine Operator/Owner

Manual included with your tractor. BATTERY— The battery is in need of a charge, or the

engine’s charging system is not generating sufficient amperage. Refer to the MAINTENANCE section of this manual

12

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Operator’s Manual Table of Contents Important Safe Operation Practices General OperationSlope Operation Towing Safety labels found on your unit Slope Gauge Attaching the Battery Cables Gas and Oil Fill-upShipping Brace Removal Quick Adjustment Seat Knob Adjustment SeatAttaching the Steering Wheel Attaching the SeatKnow Your Lawn Tractor Throttle Control LeverChoke Control Brake PedalThrottle Lever Ignition Switch Module Systems Indicator MonitorDrive Pedal Seat Adjustment Lever Electric PTO Blade Engage KnobManual PTO Blade Engage Lever Deck Lift LeverSafety Interlock Switches Reverse Caution ModeOperating Your Lawn Tractor Shift LeverSetting the Cutting Height Engaging the Parking BrakeStarting the Engine Setting the Cruise Control Stopping the EngineDriving the Tractor Driving On SlopesUsing the Deck Lift Lever MowingMulching HeadlightsMaking Adjustments Parking Brake AdjustmentLeveling the Deck Front To RearSeat Adjustment Steering AdjustmentQuick-Adjust Seat if so equipped Knob Adjustment Seat if so equippedCleaning the Engine and Deck Maintaining Your Lawn TractorEngine LubricationService BatteryCutting Deck Removal TiresCleaning Battery FailuresCutting Blades ChargingFuses Changing the Deck Belt & PTO BeltInch and 46-inch Decks with Manual PTO Inch and 46-inch Decks with Electric PTOChanging the Transmission Drive Belts v$ECKAttachments & Accessories OFF-SEASON StorageTroubleshooting Trouble Possible Causes Corrective ActionMANUFACTURER’S Limited Warranty

LT-542K, LT-942K, LT-946K specifications

The White Outdoor LT-542K, LT-942K, and LT-946K are robust riding lawn mowers known for their reliability and performance, making them popular choices among homeowners and landscapers alike. Each model is designed to tackle large yards with ease, providing an efficient and effective mowing experience.

The LT-542K model features a 42-inch cutting deck, allowing users to cover more ground in less time. It is powered by a reliable Kohler engine, which delivers ample power to handle various mowing conditions. The LT-542K also comes equipped with a hydrostatic transmission that offers smooth, effortless operation, allowing users to adjust their speed without the need for shifting gears. This feature is particularly useful for navigating tight spaces and uneven terrain.

Moving on to the LT-942K, this model takes performance a step further with a larger 48-inch cutting deck. This increased width allows for quicker mowing over larger areas, reducing overall mowing time. The LT-942K is also equipped with a powerful Briggs & Stratton engine, renowned for its durability and efficiency. The automatic transmission provides an easier driving experience, while the comfortable seating and ergonomic controls ensure that users can operate the mower for extended periods without discomfort.

The LT-946K model is the flagship of these series, boasting a 46-inch cutting deck that strikes a balance between maneuverability and cutting capacity. This model further enhances the mowing experience with its advanced features, including a mulching capability that allows users to finely chop grass clippings, returning nutrients back into the lawn. The LT-946K is designed with a heavy-duty steel frame to withstand rigorous usage, ensuring longevity and robustness.

All three models share essential characteristics such as easy cutting height adjustment, allowing users to customize their lawn’s finish. They also feature reliable, efficient engines that can easily tackle tough mowing conditions. In addition, their intuitive controls and user-friendly designs make them accessible for both seasoned operators and those new to riding mowers.

In summary, the White Outdoor LT-542K, LT-942K, and LT-946K offer a combination of power, durability, and ease of use. Whether for residential use or professional landscaping, these mowers deliver performance that meets the needs of various users, proving to be valuable assets in lawn care maintenance.
Top Page Image Contents