Gas and Oil Fill-up

SECTION 3: TRACTOR SET-UP

NOTE: This owner’s manual covers various models of lawn tractors. The units illustrated may vary slightly from your unit. Follow only those instructions which pertain to your model lawn tractor.

Attaching the Battery Cables

NOTE: The positive battery terminal is marked Pos.

(+). The negative battery terminal is marked Neg. (–).

•The positive cable (heavy red wire) is secured to the positive battery terminal (+) with a hex bolt and hex nut at the factory. Make certain that the rubber boot covers the terminal to help protect it from corrosion.

•Remove the hex bolt and wing nut from the negative cable.

•Remove the black plastic cover, if present, from the negative battery terminal and attach the negative cable (heavy black wire) to the negative battery terminal (–) with the bolt and wing nut.

•Make certain the retainer rod is in position over the battery, securing it in place. See Figure 1.

	Rubber Boot
	Retainer Rod
Wing Nut	Hex Bolt

Figure 1

NOTE: If the battery is put into service after the date shown on top of battery, charge the battery as instructed in the SERVICE section of this manual prior to operating the tractor.

The gasoline tank is located under the hood and has a capacity of either two or three gallons. Do not overfill.

WARNING: Use extreme care when handling gasoline. Gasoline is extremely flammable and the vapors are explosive. Never fuel machine indoors or while the engine is hot or running. Extinguish cigarettes, cigars, pipes, and other sources of ignition.

Service the engine with gasoline and oil as instructed in the separate engine manual packed with your tractor. Read instructions carefully.

IMPORTANT: Your tractor is shipped with motor oil in the engine. However, you MUST check the oil level before operating. Be careful not to overfill.

Shipping Brace Removal

WARNING: Make sure the riding mower’s engine is off, remove the ignition key, and set the parking brake before removing the shipping brace.

•Locate the shipping brace, if present, and accompanying warning tag found on the right side of the mower, between the discharge chute and the cutting deck. See Figure 2.

Warning Tag

Shipping Brace

Figure 2

•While holding the discharge chute with your left hand, remove the shipping brace with your right hand by grasping it between your thumb and index finger and rotating it clockwise.

WARNING: The shipping brace, used for packaging purposes only, must be removed and discarded before operating your riding mower.

LT-542K, LT-942K, LT-946K specifications

The White Outdoor LT-542K, LT-942K, and LT-946K are robust riding lawn mowers known for their reliability and performance, making them popular choices among homeowners and landscapers alike. Each model is designed to tackle large yards with ease, providing an efficient and effective mowing experience.

The LT-542K model features a 42-inch cutting deck, allowing users to cover more ground in less time. It is powered by a reliable Kohler engine, which delivers ample power to handle various mowing conditions. The LT-542K also comes equipped with a hydrostatic transmission that offers smooth, effortless operation, allowing users to adjust their speed without the need for shifting gears. This feature is particularly useful for navigating tight spaces and uneven terrain.

Moving on to the LT-942K, this model takes performance a step further with a larger 48-inch cutting deck. This increased width allows for quicker mowing over larger areas, reducing overall mowing time. The LT-942K is also equipped with a powerful Briggs & Stratton engine, renowned for its durability and efficiency. The automatic transmission provides an easier driving experience, while the comfortable seating and ergonomic controls ensure that users can operate the mower for extended periods without discomfort.

The LT-946K model is the flagship of these series, boasting a 46-inch cutting deck that strikes a balance between maneuverability and cutting capacity. This model further enhances the mowing experience with its advanced features, including a mulching capability that allows users to finely chop grass clippings, returning nutrients back into the lawn. The LT-946K is designed with a heavy-duty steel frame to withstand rigorous usage, ensuring longevity and robustness.

All three models share essential characteristics such as easy cutting height adjustment, allowing users to customize their lawn’s finish. They also feature reliable, efficient engines that can easily tackle tough mowing conditions. In addition, their intuitive controls and user-friendly designs make them accessible for both seasoned operators and those new to riding mowers.

In summary, the White Outdoor LT-542K, LT-942K, and LT-946K offer a combination of power, durability, and ease of use. Whether for residential use or professional landscaping, these mowers deliver performance that meets the needs of various users, proving to be valuable assets in lawn care maintenance.