White Outdoor LT-542K, LT-942K, LT-946K manual Service, Cutting Deck Removal, Tires, Battery

Page 21

Deck Wash System™ (Optional)

A hex plug can be found on your tractor’s deck surface. This plug can be replaced with a water port to be used as part of a separately-available deck wash system.

Use the Deck Wash System to rinse grass clippings from the deck’s underside and prevent build-up of corrosive chemicals. Refer to page 25 for information regarding this and other separately-available attach- ments & accessories for your tractor.

Hex Plug

SECTION 8: SERVICE

Cutting Deck Removal

To remove the cutting deck, proceed as follows:

•Place the PTO (Blade Engage) knob (or lever) in the disengaged (OFF) position and engage the parking brake.

•Lower the deck by moving the deck lift lever into the bottom notch on the right fender.

•Remove the PTO belt from around the tractor’s engine pulley (or electric PTO clutch, if so equipped) and idler pulley(s). See Figure 18.

NOTE: On models with a 46-inch deck, it may be necessary to remove the belt keepers from around the engine pulley, in order to removes the PTO belt.

•Looking at the cutting deck from the left side of the tractor, locate the deck support pin on the rear left side of the deck. See Figure 18.

Support Pin

Figure 18

•Pull the deck support pin outward to release the deck from the deck lift arm.

•Rotate the pin slightly toward the rear of the tractor and release the pin into the hole provided.

•Repeat the above steps on the tractor’s right side.

•Move the deck lift lever into the top notch on the right fender to raise the deck lift arms up and out of the way.

NOTE: Models with a 46-inch deck are equipped with a short cable which controls the deck spindle brake. It is necessary to unhook this cable in order to fully remove the cutting deck from the tractor. Be certain to reattach the cable when re-mounting the cutting deck.

•Gently slide the cutting deck toward the front of the tractor allowing the hooks on the deck to release themselves from the deck stabilizer rod.

•Gently slide the cutting deck (from the right side) out from underneath the tractor.

Tires

WARNING: Refer to the tire sidewall for exact tire manufacturer’s recommended or maximum psi. Do not overinflate. Uneven tire pressure could cause the cutting deck to mow unevenly.

The recommended operating tire pressure is:

•Approximately 10 psi for the rear tires

•Approximately 14 psi for the front tires

Battery

The battery is sealed and is maintenance-free. Acid levels cannot be checked.

21

Page 20 Page 22
Image 21
Page 20 Page 22
Contents Operator’s Manual Table of Contents General Operation Important Safe Operation PracticesSlope Operation Towing Safety labels found on your unit Slope Gauge Attaching the Battery Cables Gas and Oil Fill-upShipping Brace Removal Knob Adjustment Seat Quick Adjustment SeatAttaching the Steering Wheel Attaching the SeatThrottle Control Lever Know Your Lawn TractorChoke Control Brake PedalThrottle Lever Ignition Switch Module Systems Indicator MonitorDrive Pedal Electric PTO Blade Engage Knob Seat Adjustment LeverManual PTO Blade Engage Lever Deck Lift LeverReverse Caution Mode Safety Interlock SwitchesOperating Your Lawn Tractor Shift LeverSetting the Cutting Height Engaging the Parking BrakeStarting the Engine Stopping the Engine Setting the Cruise ControlDriving the Tractor Driving On SlopesMowing Using the Deck Lift LeverMulching HeadlightsParking Brake Adjustment Making AdjustmentsLeveling the Deck Front To RearSteering Adjustment Seat AdjustmentQuick-Adjust Seat if so equipped Knob Adjustment Seat if so equippedMaintaining Your Lawn Tractor Cleaning the Engine and DeckEngine LubricationBattery ServiceCutting Deck Removal TiresBattery Failures CleaningCutting Blades ChargingChanging the Deck Belt & PTO Belt FusesInch and 46-inch Decks with Manual PTO Inch and 46-inch Decks with Electric PTOv$ECK Changing the Transmission Drive BeltsOFF-SEASON Storage Attachments & AccessoriesTrouble Possible Causes Corrective Action TroubleshootingMANUFACTURER’S Limited Warranty

LT-542K, LT-942K, LT-946K specifications

The White Outdoor LT-542K, LT-942K, and LT-946K are robust riding lawn mowers known for their reliability and performance, making them popular choices among homeowners and landscapers alike. Each model is designed to tackle large yards with ease, providing an efficient and effective mowing experience.

The LT-542K model features a 42-inch cutting deck, allowing users to cover more ground in less time. It is powered by a reliable Kohler engine, which delivers ample power to handle various mowing conditions. The LT-542K also comes equipped with a hydrostatic transmission that offers smooth, effortless operation, allowing users to adjust their speed without the need for shifting gears. This feature is particularly useful for navigating tight spaces and uneven terrain.

Moving on to the LT-942K, this model takes performance a step further with a larger 48-inch cutting deck. This increased width allows for quicker mowing over larger areas, reducing overall mowing time. The LT-942K is also equipped with a powerful Briggs & Stratton engine, renowned for its durability and efficiency. The automatic transmission provides an easier driving experience, while the comfortable seating and ergonomic controls ensure that users can operate the mower for extended periods without discomfort.

The LT-946K model is the flagship of these series, boasting a 46-inch cutting deck that strikes a balance between maneuverability and cutting capacity. This model further enhances the mowing experience with its advanced features, including a mulching capability that allows users to finely chop grass clippings, returning nutrients back into the lawn. The LT-946K is designed with a heavy-duty steel frame to withstand rigorous usage, ensuring longevity and robustness.

All three models share essential characteristics such as easy cutting height adjustment, allowing users to customize their lawn’s finish. They also feature reliable, efficient engines that can easily tackle tough mowing conditions. In addition, their intuitive controls and user-friendly designs make them accessible for both seasoned operators and those new to riding mowers.

In summary, the White Outdoor LT-542K, LT-942K, and LT-946K offer a combination of power, durability, and ease of use. Whether for residential use or professional landscaping, these mowers deliver performance that meets the needs of various users, proving to be valuable assets in lawn care maintenance.
Top Page Image Contents