White Outdoor 933R, 933E Engine Throttle Control, Engine Recoil Starter, Recoil starter I, -7 is

Section 3: Features and Controls

Engine Throttle Control

This lever (G, Figure 3-6) is used to adjust engine speeds and to stop the en- gine. Always run engine at fast speed setting for best mower performance. The throttle settings are shown below.

CHOKE - Use when starting a cold engine.

FAST - Use during mower operation.

SLOW - Use when idling engine.

STOP - Stops engine.

Ignition/Starter Switch - (Electric Start Model)

This three-position switch (H, Figure 3-6) is used to start and stop the engine on electric start models. The ig- nition key settings are shown below. Do not turn the key until you have read the Operation Section in this Manual.

Always remove ignition key when leaving mower unattended or when in- specting, cleaning or servicing mower.

STOP - Stops engine.

H – IGNITION/STARTER
SWITCH	G – THROTTLE CONTROL

Figure 3-6

Engine Recoil Starter

The recoil starter (I, Figure 3-7) is

used to “pull-start” the engine. Detailed instructions for using the recoil starter are found in the Operation Section of this Manual and in the Engine Owner's Manual. Do not pull the recoil starter until you have read the Operation Section.

I – RECOIL

STARTER

Figure 3-7

RUN - After starting, key returns to run position.

START - Starts engine. Release key when engine starts.

11