White Outdoor 933E, 933R manual Lubrication Chart

Page 28

Section 5: Maintenance

WARNING Before inspecting, cleaning or servicing the unit, shut off engine, wait for all parts to come to a complete stop, disconnect spark plug wire and move wire away from spark plug. Remove ignition key on electric start models. Failure to follow these instructions can result in serious personal injury or property damage.

Lubrication Chart

ITEM	INTERVAL	LUBRICATION TYPE	AMOUNT REQUIRED

Engine Crankcase	First 2 hours	Change Oil	See Engine Manual

	25-50 hours	Change Oil	Change oil more often
		(Lubrication Intervals Vary	in extremely dirty or
		with Operating Conditions	dusty conditions.
		and Type of Oil Used)

Front Wheel Bearings	50 hours	Grease	1-3 Strokes*

Control Linkages/Pivots	25 hours	Light Oil	A Few Drops

Transmission Output Shaft	100 hours or Annually	Grease	1-3 Strokes*

* A hand-type grease gun is recommended.

Image 28

Contents Operator’s Manual Model 933R ShownTable of Contents Safety Stop the blade when crossing gravel drives, walks, or roadsCleaning the mower or unclogging the chute Safe Operation Practices for Walk-Behind MowersDo not mow excessively steep slopes SafetyUse only an approved container Safety Decals On top, rear of engine platformAssembly Inspection After DeliveryUnpacking Mower Attach Handlebars to Engine DeckAssembly Contents of Hardware Bag+ U Sembling Unit ControlResult in severe personal injury or Property damageAttach Operator Presence Control Rod Attach and Adjust Gear Select LeverAttach Blade Drive Control Rod After Assembling and Before Using Unit Add Motor Oil to EngineOperator Presence Control Features and ControlsBlade Drive Control Features and Controls Gear Select LeverWheel Drive Control Cutting Height Control LeverIgnition/Starter Switch Electric Start Model Start Starts engine. Release key when engine startsEngine Throttle Control Engine Recoil StarterPre-Operation Checklist Release all controls before adjusting the cutting heightOperation Before Operating MowerOperation Starting and Stopping EngineTo Start the Engine Ignition/StarterTo Stop the Engine Engaging the BladesTo Engage the Blades To Stop the BladesMaking Turns Mowing Tips and HintsBlade Brake Control Test Maintenance Engine OILChecking Oil Level Changing OilMaintenance Engine CleaningAIR Cleaner Service Spark PlugTipping Mower for Service Blade Spindle Belt ReplacementEngine Storage Belt Cover RemovalBlade Drive Belt Replacement Blade Drive Disengaged Blade Drive EngagedBlade Brake Replacement Blade Drive Belt AdjustmentBlade Drive Control Lever Adjustment With mower on level ground, adjustWheel Drive Belt Adjustment Wheel Drive Belt ReplacementWheel Brake Adjustment Remove cotter pin securing shift link P, -15 to shift rod Follow this procedure to adjust neutral on the transmissionRotate shift rod I, Figures 5-14 Mower Blades Cleaning Underside Mower Deck Inspection/Cleaning of Mower DeckLubrication OFF-SEASON StorageLubrication Chart Maintenance Chart Symptom Is available from your local White OutdoorRoughly.runsEngine Overheats.EnginePage MANUFACTURER’S Limited Warranty for

Section 5: Maintenance

Lubrication Chart

INTERVAL

LUBRICATION TYPE

AMOUNT REQUIRED