Spa Shell Diagram
D
B
C
A
SPA OPERATION
Refer to the diagram above. The function of each component is explained below.
The suction vents (A) located near the floor of the spa bring the water into the pump in order to operate the system. The suction covers should always be in
SECURING THE SPA COVER
The spa cover can be
secured by snapping Latch the latches on the spa
cover into the buckles on the side panels.
place over the suction vents. Never operate the spa
The buckles can be
Key
without the suction covers in place.
The filter (B) can be removed for replacement and cleaning (see CHECKING AND CLEANING THE FIL- TER on page 13).
The temperature probe (C) reads the current water temperature.
Use of the console (D) is explained on page 12 of this manual.
The hydrotherapy spa offers an automatic freeze pro- tection. If the water temperature falls below 40ûF, the pump will begin circulating the water to prevent the water from freezing.
locked by inserting the
key and turning itBuckle clockwise a quarter
turn. To unlock the buckles, insert the key and turn it counterclockwise a quarter turn.
Always keep the buckles locked when the spa is not in use. Keep the keys in a safe place, out of the reach of children.
11