Woods Equipment TL73, TL52, TL84 manual Operation, PRE-OPERATION Check List, Tiller Installation

Page 10

OPERATION

Safety instructions are important! Read all attachment and power unit manuals; follow all safety rules and safety decal information. (Replace- ment manuals and safety decals are available from your dealer. To locate your nearest dealer, check the Dealer Locator at www.WoodsEquipment.com, or in the United States and Canada call 1-800-319- 6637.) Failure to follow instructions or safety rules can result in serious injury or death.

Power unit must be equipped with ROPS and seat belt/operator restraint. Keep seat belt/operator restraint securely fastened/engaged. Falling off power unit can result in death from being run over or crushed. Keep ROPS systems in place at all times.

■The operator is responsible for the safe opera- tion of this equipment. Operators must be instructed in and be capable of the safe operation of the equipment, its attachments and all controls. Do not allow anyone to operate this equipment without proper instructions.

Skid steers must be equipped with an auxiliary hydraulic system capable of supplying continuous flow for hydraulic motor operation.

PRE-OPERATION CHECK LIST

Owner’s Responsibility

___

Review and follow all safety rules and decals.

 

See safety rules on page 5 and safety decals on

 

page 8.

___

Check that all safety decals are installed and in

 

good condition. Replace if damaged.

___

Check that all shields and guards are properly

 

installed and in good condition. Replace if dam-

 

aged.

___

Check that equipment is properly and securely

 

attached to skid steer.

___

Check that all hardware and cotter pins are prop-

 

erly installed and secured.

___

Do not allow riders.

___ Keep all bystanders away from equipment work- ing area.

___ Check that all hydraulic hoses and fittings are in good condition and not leaking before starting power unit.

___ Check that hoses are not twisted, bent sharply, kinked, frayed or pulled tight. Replace any dam- aged hoses immediately.

___ Make sure power unit ROPS and seat belts are in good condition. Keep seat belt securely fastened during operation.

TILLER INSTALLATION

Read instructions in the skid steer operator’s manual for connecting and removing attachment.

Place the couplers in the disengaged position as shown in Figure 1. Rotate the skid steer attachment slightly forward and fully lower the lift arms.

DP1

Figure 1.

Pull forward to the attachment as shown in Figure 2. Make sure the outside of the skid steer attach (1) is aligned with the inside of the tiller attach (2). Continue to pull forward until the skid steer attach makes contact with the tiller attach. Raise the skid steer arms until the top of the skid steer attach contacts the top latch bar

(3) on the tiller.

10 Operation

MAN0003 (Rev. 11/30/2006)

 

 

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Skid Steer Tiller To the Dealer IntroductionTo the Owner Table of Contents General Information SpecificationsRPM Installation SafetySafety Rules PreparationOperation Maintenance StorageSafety & Instructional Decals Replace Immediately If DamagedBe Careful Operation Tiller InstallationOperation PRE-OPERATION Check ListTiller Depth Adjustment Tiller OperationCleaning TransportTroubleshooting TroubleshootingProblem Possible Causes Solution Troubleshooting Drum Removal ServiceService Motor RemovalMotor Installation Drum Installation TL84Depth Skid Assembly Tine Replacement Drum Assembly PartsBase Unit Assembly Seal Kit TL84 motorHydraulic Assembly TL52 Hydraulic Assembly TL73 Hydraulic Assembly TL84 Decal Placement Torque Fitting Torque ChartAppendix SAE JICQuick Coupler KIT Components Quick CouplerQuick Coupler Kits QC KITQuick Coupler Set SAE Series Torque Chart Bolt Torque ChartMetric Series Bolt Size Chart AbbreviationsWarranty Rev /23/2005 MAN0003

TL84, TL73, TL52 specifications

Woods Equipment has been a trusted name in the agricultural and landscape equipment industry for decades, delivering high-quality solutions for various needs. Among its lineup, the TL84, TL52, and TL73 loaders stand out, designed to enhance performance and efficiency for a range of applications.

The TL84 loader is known for its robust construction and impressive lift capacity, making it a favorite among farmers and contractors. With a maximum lift capacity of approximately 2,800 pounds, the TL84 can handle heavy materials with ease. This loader features an advanced hydraulic system that ensures smooth operation, enabling precise control when lifting or transporting materials. The quick-attach mounting system allows users to switch attachments quickly, enhancing productivity on the job site. The TL84 also boasts a reinforced design that minimizes wear and tear, ensuring durability even in the toughest conditions.

The TL52 loader, on the other hand, is tailored for smaller tractors, boasting a lift capacity of around 1,500 pounds. This loader is perfect for those who require a nimble yet powerful option for lighter tasks such as landscaping or light agricultural work. Its compact design allows it to maneuver easily in tight spaces, while its user-friendly controls make it accessible for operators of all skill levels. The TL52 also supports various attachments, making it versatile enough to handle a multitude of tasks without requiring multiple pieces of equipment.

Finally, the TL73 loader strikes a balance between the TL84 and TL52, offering a lift capacity of approximately 2,200 pounds. It is designed for medium-sized tractors, making it an ideal choice for a variety of applications, from material handling to maintenance tasks. The TL73 is known for its exceptional stability and strength, thanks to its welded and reinforced construction. Furthermore, its hydraulic system is engineered for efficiency, providing faster cycle times and reducing downtime.

All three models incorporate advanced technologies such as a high-performance hydraulic system, ergonomic controls, and compatibility with a wide range of attachments. Each loader is designed with safety features, including a built-in safety valve to prevent overload situations. For operators seeking reliability, efficiency, and user-friendly operation, Woods Equipment's TL84, TL52, and TL73 loaders represent distinguished choices that meet diverse agricultural and landscaping needs. With Woods Equipment’s commitment to quality and innovation, these loaders are built to deliver exceptional performance in any challenging environment.
Top Page Image Contents