Woods Equipment TL84, TL52, TL73 manual Tiller Depth Adjustment, Tiller Operation

Page 11

3

2

1

DP2

Figure 2.

Roll the skid steer arms back until the tiller is com- pletely off the ground. Engage the parking break on the skid steer. Stop engine and relieve the back pressure in the auxiliary hydraulic system. Exit the skid steer.

Move the coupler pins to the engaged position. Hook up the auxiliary hydraulic hoses. Be sure they are routed to prevent any hose interference. Check the attach pins (4) to be sure they are fully engaged in the attach bracket as shown in Figure 3.

4

DP3

Figure 3.

TILLER DEPTH ADJUSTMENT

All tiller models have four depth settings. Moving the depth skid location allows the depth setting to be changed. Figure 4 shows the cutting depth for the four depth positions. When making adjustments, be sure that both skids are set at the same position.

To change the depth skid position, lower the tiller to the ground so the weight is supported on the tines. Remove the two bolts from each depth skid. Adjust the

depth skid for the desired cutting depth. Reinstall the two bolts and torque to 250 lbs-ft (325 N-m).

1.5.50" Cutting Depth

2.4.25" Cutting Depth

3.2.25" Cutting Depth

6.00" Cutting Depth if Skid is Removed

Figure 4.

TILLER OPERATION

■Read and understand the tiller and skid steer operator’s manuals before operating the tiller. Fail- ure to do so may result in death, serious personal injury or properly damage.

The tiller is a hydraulic powered attachment intended to cultivate soil. The tiller attachment operation is bi-direc- tional; it will operate with tines rotating in either direc- tion.

The TL52 has an offset mounting configuration to allow the right tracks to be covered when the skid steer moves in reverse for finishing the tilling operation.

The performance of the tiller can vary significantly depending upon the way it is used. The tiller attach- ment requires a minimum hydraulic supply. For require- ments on each model see specifications on page 4.

MAN0003 (Rev. 11/30/2006)

Operation 11

 

 

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Skid Steer Tiller To the Owner IntroductionTo the Dealer Table of Contents RPM SpecificationsGeneral Information Preparation SafetySafety Rules InstallationOperation Storage MaintenanceReplace Immediately If Damaged Safety & Instructional DecalsBe Careful PRE-OPERATION Check List Tiller InstallationOperation OperationTiller Operation Tiller Depth AdjustmentTransport CleaningProblem Possible Causes Solution TroubleshootingTroubleshooting Troubleshooting Motor Removal ServiceService Drum RemovalMotor Installation TL84 Drum InstallationDepth Skid Assembly Tine Replacement Parts Drum AssemblySeal Kit TL84 motor Base Unit AssemblyHydraulic Assembly TL52 Hydraulic Assembly TL73 Hydraulic Assembly TL84 Decal Placement SAE JIC Fitting Torque ChartAppendix TorqueQC KIT Quick CouplerQuick Coupler Kits Quick Coupler KIT ComponentsQuick Coupler Set Metric Series Bolt Torque ChartSAE Series Torque Chart Abbreviations Bolt Size ChartWarranty Rev /23/2005 MAN0003

TL84, TL73, TL52 specifications

Woods Equipment has been a trusted name in the agricultural and landscape equipment industry for decades, delivering high-quality solutions for various needs. Among its lineup, the TL84, TL52, and TL73 loaders stand out, designed to enhance performance and efficiency for a range of applications.

The TL84 loader is known for its robust construction and impressive lift capacity, making it a favorite among farmers and contractors. With a maximum lift capacity of approximately 2,800 pounds, the TL84 can handle heavy materials with ease. This loader features an advanced hydraulic system that ensures smooth operation, enabling precise control when lifting or transporting materials. The quick-attach mounting system allows users to switch attachments quickly, enhancing productivity on the job site. The TL84 also boasts a reinforced design that minimizes wear and tear, ensuring durability even in the toughest conditions.

The TL52 loader, on the other hand, is tailored for smaller tractors, boasting a lift capacity of around 1,500 pounds. This loader is perfect for those who require a nimble yet powerful option for lighter tasks such as landscaping or light agricultural work. Its compact design allows it to maneuver easily in tight spaces, while its user-friendly controls make it accessible for operators of all skill levels. The TL52 also supports various attachments, making it versatile enough to handle a multitude of tasks without requiring multiple pieces of equipment.

Finally, the TL73 loader strikes a balance between the TL84 and TL52, offering a lift capacity of approximately 2,200 pounds. It is designed for medium-sized tractors, making it an ideal choice for a variety of applications, from material handling to maintenance tasks. The TL73 is known for its exceptional stability and strength, thanks to its welded and reinforced construction. Furthermore, its hydraulic system is engineered for efficiency, providing faster cycle times and reducing downtime.

All three models incorporate advanced technologies such as a high-performance hydraulic system, ergonomic controls, and compatibility with a wide range of attachments. Each loader is designed with safety features, including a built-in safety valve to prevent overload situations. For operators seeking reliability, efficiency, and user-friendly operation, Woods Equipment's TL84, TL52, and TL73 loaders represent distinguished choices that meet diverse agricultural and landscaping needs. With Woods Equipment’s commitment to quality and innovation, these loaders are built to deliver exceptional performance in any challenging environment.
Top Page Image Contents