Operation

SAFETY RULES

ATTENTION! BECOME ALERT! YOUR SAFETY IS INVOLVED!

(Safety Rules continued from previous page)

Be sure attachment is properly secured, adjusted, and in good operating condition. Coupler lockpins must be fully extended and properly engaged into attachment retaining slots.

Power unit must be equipped with ROPS and seat belt/operator restraint. Keep seat belt/operator restraint securely fastened/engaged. Falling off power unit can result in death from being run over or crushed. Keep ROPS systems in place at all times.

Make sure all safety decals are installed. Replace if damaged. (See Safety Decals section for location.)

Make sure shields and guards are properly installed and in good condition. Replace if damaged.

Inspect and clear area of stones, branches, or other hard objects that might be thrown, causing injury or damage.

Improper operation can cause the machine to tip or roll over and cause injury or death.

•Keep power unit lift arms and attachment as low as possible.

•Do not travel or turn with power unit lift arms and attachment raised.

•Turn only on level ground.

•Go up and down slopes, not across them.

•Keep the heavy end of the machine uphill.

•Do not overload the machine.

Never use attachment to carry loads that exceed the rated operating capacity or other specifications of the power unit. Check your power unit manual or see your dealer for rated operating capacity. Exceeding this capacity can cause machine to tip, roll over, or present other hazards that can cause injury or death.

Do not allow bystanders in the area when oper- ating, attaching, removing, assembling, or servic- ing equipment.

Contact with high voltage, overhead power lines, underground cables, gas lines, and other hazards can cause serious injury or death from electrocution, explosion, or fire.

Keep bystanders away from equipment.

Never direct discharge toward people, animals, or property.

Do not operate or transport equipment while under the influence of alcohol or drugs.

Operate only in daylight or good artificial light.

Keep hands, feet, hair, and clothing away from equipment while engine is running. Stay clear of all moving parts.

Always comply with all state and local lighting and marking requirements.

Do not allow riders. Do not lift or carry anybody on the power unit or attachments.

Always sit in power unit seat when operating controls or starting engine. Securely fasten seat belt/operator restraint, place transmission in park or neutral, engage brake and ensure all other con- trols are disengaged before starting power unit engine.

Look down and to the rear and make sure area is clear before operating in reverse.

Use extreme care when working close to fences, ditches, other obstructions, or on hillsides.

Do not operate or transport on steep slopes.

Do not stop, start, or change directions sud- denly on slopes.

Use extreme care and reduce ground speed on slopes and rough terrain.

Watch for hidden hazards on the terrain during operation.

Stop power unit and implement immediately upon striking an obstruction. Dismount power unit, using proper procedure. Inspect and repair any damage before resuming operation.

Leak down or failure of mechanical or hydraulic system can cause equipment to drop.

Before making any adjustments on attachment, stop engine and engage parking brake. Never adjust or work on attachment while the power unit or attachment is running.

(Safety Rules continued on next page)

6Safety

Alitec Tiller SR (Rev. 11/30/2006)

TL84, TL73, TL52 specifications

Woods Equipment has been a trusted name in the agricultural and landscape equipment industry for decades, delivering high-quality solutions for various needs. Among its lineup, the TL84, TL52, and TL73 loaders stand out, designed to enhance performance and efficiency for a range of applications.

The TL84 loader is known for its robust construction and impressive lift capacity, making it a favorite among farmers and contractors. With a maximum lift capacity of approximately 2,800 pounds, the TL84 can handle heavy materials with ease. This loader features an advanced hydraulic system that ensures smooth operation, enabling precise control when lifting or transporting materials. The quick-attach mounting system allows users to switch attachments quickly, enhancing productivity on the job site. The TL84 also boasts a reinforced design that minimizes wear and tear, ensuring durability even in the toughest conditions.

The TL52 loader, on the other hand, is tailored for smaller tractors, boasting a lift capacity of around 1,500 pounds. This loader is perfect for those who require a nimble yet powerful option for lighter tasks such as landscaping or light agricultural work. Its compact design allows it to maneuver easily in tight spaces, while its user-friendly controls make it accessible for operators of all skill levels. The TL52 also supports various attachments, making it versatile enough to handle a multitude of tasks without requiring multiple pieces of equipment.

Finally, the TL73 loader strikes a balance between the TL84 and TL52, offering a lift capacity of approximately 2,200 pounds. It is designed for medium-sized tractors, making it an ideal choice for a variety of applications, from material handling to maintenance tasks. The TL73 is known for its exceptional stability and strength, thanks to its welded and reinforced construction. Furthermore, its hydraulic system is engineered for efficiency, providing faster cycle times and reducing downtime.

All three models incorporate advanced technologies such as a high-performance hydraulic system, ergonomic controls, and compatibility with a wide range of attachments. Each loader is designed with safety features, including a built-in safety valve to prevent overload situations. For operators seeking reliability, efficiency, and user-friendly operation, Woods Equipment's TL84, TL52, and TL73 loaders represent distinguished choices that meet diverse agricultural and landscaping needs. With Woods Equipment’s commitment to quality and innovation, these loaders are built to deliver exceptional performance in any challenging environment.