Woods Equipment TL73, TL52, TL84 manual Maintenance, Storage

Page 7

SAFETY RULES

ATTENTION! BECOME ALERT! YOUR SAFETY IS INVOLVED!

(Safety Rules continued from previous page)

MAINTENANCE

Before leaving operator's seat, follow power unit manual instructions. Lower lift arms and put attachment on the ground. Stop engine, remove key, engage brake, and remove seat belt/operator restraint.

NEVER GO UNDERNEATH EQUIPMENT. Never place any part of the body underneath equipment or between moveable parts even when the engine has been turned off. Hydraulic system leak-down, hydraulic system failures, mechanical failures, or movement of control levers can cause equipment to drop or rotate unexpectedly and cause severe injury or death.

•Service work does not require going under- neath.

•Read Operator's Manual for service instruc- tions or have service performed by a qualified dealer.

Do not modify or alter or permit anyone else to modify or alter the equipment or any of its compo- nents in any way.

Your dealer can supply original equipment hydraulic accessories and repair parts. Substitute parts may not meet original equipment specifica- tions and may be dangerous.

Do not allow bystanders in the area when oper- ating, attaching, removing, assembling, or servic- ing equipment.

Never perform service or maintenance with engine running.

Keep all persons away from operator control area while performing adjustments, service, or maintenance.

Tighten all bolts, nuts, and screws to torque chart specifications. Check that all cotter pins are installed securely to ensure equipment is in a safe condition before putting unit into service.

Make sure all safety decals are installed. Replace if damaged. (See Safety Decals section for location.)

Make sure shields and guards are properly installed and in good condition. Replace if damaged.

Do not disconnect hydraulic lines until all sys- tem pressure is relieved. Lower unit to ground, stop engine, and operate all hydraulic control levers.

Leak down or failure of mechanical or hydraulic system can cause equipment to drop.

STORAGE

Follow manual instructions for storage.

Keep children and bystanders away from stor- age area.

Alitec Tiller SR (Rev. 11/30/2006)

Safety 7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Skid Steer Tiller To the Dealer IntroductionTo the Owner Table of Contents General Information SpecificationsRPM Preparation SafetySafety Rules InstallationOperation Storage MaintenanceReplace Immediately If Damaged Safety & Instructional DecalsBe Careful PRE-OPERATION Check List Tiller InstallationOperation OperationTiller Operation Tiller Depth AdjustmentTransport CleaningTroubleshooting TroubleshootingProblem Possible Causes Solution Troubleshooting Motor Removal ServiceService Drum RemovalMotor Installation TL84 Drum InstallationDepth Skid Assembly Tine Replacement Parts Drum AssemblySeal Kit TL84 motor Base Unit AssemblyHydraulic Assembly TL52 Hydraulic Assembly TL73 Hydraulic Assembly TL84 Decal Placement SAE JIC Fitting Torque ChartAppendix TorqueQC KIT Quick CouplerQuick Coupler Kits Quick Coupler KIT ComponentsQuick Coupler Set SAE Series Torque Chart Bolt Torque ChartMetric Series Abbreviations Bolt Size ChartWarranty Rev /23/2005 MAN0003

TL84, TL73, TL52 specifications

Woods Equipment has been a trusted name in the agricultural and landscape equipment industry for decades, delivering high-quality solutions for various needs. Among its lineup, the TL84, TL52, and TL73 loaders stand out, designed to enhance performance and efficiency for a range of applications.

The TL84 loader is known for its robust construction and impressive lift capacity, making it a favorite among farmers and contractors. With a maximum lift capacity of approximately 2,800 pounds, the TL84 can handle heavy materials with ease. This loader features an advanced hydraulic system that ensures smooth operation, enabling precise control when lifting or transporting materials. The quick-attach mounting system allows users to switch attachments quickly, enhancing productivity on the job site. The TL84 also boasts a reinforced design that minimizes wear and tear, ensuring durability even in the toughest conditions.

The TL52 loader, on the other hand, is tailored for smaller tractors, boasting a lift capacity of around 1,500 pounds. This loader is perfect for those who require a nimble yet powerful option for lighter tasks such as landscaping or light agricultural work. Its compact design allows it to maneuver easily in tight spaces, while its user-friendly controls make it accessible for operators of all skill levels. The TL52 also supports various attachments, making it versatile enough to handle a multitude of tasks without requiring multiple pieces of equipment.

Finally, the TL73 loader strikes a balance between the TL84 and TL52, offering a lift capacity of approximately 2,200 pounds. It is designed for medium-sized tractors, making it an ideal choice for a variety of applications, from material handling to maintenance tasks. The TL73 is known for its exceptional stability and strength, thanks to its welded and reinforced construction. Furthermore, its hydraulic system is engineered for efficiency, providing faster cycle times and reducing downtime.

All three models incorporate advanced technologies such as a high-performance hydraulic system, ergonomic controls, and compatibility with a wide range of attachments. Each loader is designed with safety features, including a built-in safety valve to prevent overload situations. For operators seeking reliability, efficiency, and user-friendly operation, Woods Equipment's TL84, TL52, and TL73 loaders represent distinguished choices that meet diverse agricultural and landscaping needs. With Woods Equipment’s commitment to quality and innovation, these loaders are built to deliver exceptional performance in any challenging environment.
Top Page Image Contents