Woods Equipment TCR74, TCR60 Dealer Check Lists, PRE-DELIVERY Check List, Delivery Check List

Page 26

DEALER CHECK LISTS

PRE-DELIVERY CHECK LIST

(DEALER’S RESPONSIBILITY)

Inspect the equipment thoroughly after assembly to make sure it is set up properly before delivering it to the customer.

The following check list is a reminder of points to inspect. Check off each item as it is found satisfactory, corrections are made, or services are performed.

___ Check that all safety decals are installed and in good condition. Replace if damaged.

___ Check that all shields and guards are properly installed and in good condition. Replace if dam- aged.

___ Check all bolts to be sure they are properly torqued

___ Check and grease all lubrication points as identi- fied in the Lubrication Maintenance illustration, page 16.

___ Check the level of gearbox fluid before delivery. Service, if required, as specified on page 16.

___ Check that blades have been properly installed

DELIVERY CHECK LIST

(DEALER’S RESPONSIBILITY)

___ Show customer how to make adjustments and select proper PTO speed.

___ Instruct customer how to lubricate and explain importance of lubrication.

___

Point out the safety decals. Explain their meaning

 

and the need to keep them in place and in good

 

condition. Emphasize the increased safety haz-

 

ards when instructions are not followed.

___

Point out all guards and shields. Explain their

 

importance and the safety hazards that exist

 

when not kept in place and in good condition.

___

Present Operator's Manual and request that cus-

 

tomer and all operators read it before operating

 

equipment. Point out the manual safety rules,

 

explain their meanings, and emphasize the

 

increased safety hazards that exist when safety

 

rules are not followed.

___

Explain to customer the potential crushing haz-

 

ards of going underneath raised equipment.

 

Instruct customer that service work does not

 

require going underneath unit and never to do so.

___

Explain to customer that when equipment is

 

transported on a road or highway, safety devices

 

should be used to give adequate warning to oper-

 

ators of other vehicles.

___

Inform customer to operate PTO at 540 rpm max-

 

imum.

___

Explain to customer the importance of having the

 

correct PTO driveline length so that it does not

 

bottom out or come apart. Explain that it must be

 

checked as instructed in the manual whenever

 

using a different tractor.

___

Show customer the safe, proper procedures to be

 

used when mounting, dismounting, and storing

 

equipment.

26 Dealer Check Lists

MAN0813 (3/17/2010)

 

Page 25 Page 27
Image 26
Page 25 Page 27
Contents Rotary Tillers Introduction To the DealerTable of Contents LEA EL InstructivoSpecifications General InformationTraining SafetySafety Rules PreparationMaintenance Storage Safety & Instructional Decals Replace Immediately If DamagedBe Careful To Avoid Serious Injury or DeathOperation OperationDriveline Attachment Shortening DrivelineWorking Depth Adjustment Tiller Side Shift AdjustmentTractor Stability Operating ProcedureRear Shield Adjustment Clutch Run-InOperating Techniques PRE-OPERATION Check ListBlocking Method Owner ServiceOwner Service Lubrication Information Chain MaintenanceQualified Technician Maintenance Gearbox Lubrication PTO Drive LinesCleaning Slip Clutch AdjustmentDriveline Shear Bolt Replacement Blade Installation Four Blade InstallationTrouble Shooting Gearbox Maintenance Dealer ServiceDealer Service Seal ReplacementInput Shaft Repair Output Hollow Shaft RepairJoint Disassembly Universal Joint RepairJoint Assembly Install CupsAssembly Procedures AssemblyAssembly SET-UP InstructionsCrate Assembly PRE-DELIVERY Check List Dealer Check ListsDealer Check Lists Delivery Check ListRotary Tillers PartsTC60/TCR60 Rotary Tiller Assembly Hhcs TC68/TCR68 Rotary Tiller Assembly 103183668 TC74/TCR74 Rotary Tiller Assembly 103183674 Comer Slip Clutch Drive Assembly Part QTY DescriptionComer Shear Bolt Drive Assembly Optional Gearbox Assembly Metric Series Torque Chart Bolt Torque ChartSAE Series Torque Chart AppendixBolt Size Chart AbbreviationsWarranty Rev /3/2011

TC68, TC60, TC74, TCR74, TCR68 specifications

Woods Equipment has established a reputation for producing high-quality agricultural and landscaping equipment, and their line of TCR and TC series implements exemplifies this commitment to quality and performance. The TCR68, TCR74, TCR60, TC60, and TC68 models are notable products within this range, tailored to meet the diverse needs of operators in various situations.

The TCR series, including the TCR68 and TCR74, is designed as a compact rotary cutter that efficiently handles heavy grass and brush. One of the standout features of the TCR series is its robust construction, incorporating a durable steel frame and high-performance blades that make it highly effective in dense growth areas. The TCR models are equipped with a flexible hitch system, allowing for easy attachment to a range of tractors, delivering exceptional maneuverability while enhancing productivity on any job site.

The TCR68, known for its 68-inch cutting width, is perfect for medium-sized properties, providing an excellent balance between size and power. Conversely, the TCR74 with a 74-inch width caters to larger open areas, ensuring fewer passes are needed for efficiency. Both models feature a maximum cutting height adjustment, catering to the specific needs of users for different types of landscaping jobs.

The TC series, which includes the TC60 and TC68, takes versatility to the next level. These models serve as versatile tillage tools. The TC60 features a 60-inch working width, making it ideal for smaller gardens and farms. Built with a robust frame and quality components, it ensures long-lasting performance. The TC68 model offers an increased working width of 68 inches, appealing to larger landowners who require fast and efficient soil preparation.

Both TC models emphasize ease of use, with user-friendly adjustments for depth and tilling intensity. They feature advanced technologies such as automatic depth control, ensuring consistent tillage results across varying soil conditions.

In conclusion, whether choosing the TCR series for cutting or the TC series for tilling, Woods Equipment provides reliable and effective solutions. These models combine advanced engineering, durable materials, and innovative features, positioning them as go-to implements for agricultural and landscaping professionals alike. Their commitment to performance and reliability continues to make Woods Equipment a trusted name in the industry.
Top Page Image Contents