Woods Equipment T5070, T5060, T5040, T5050 Hose Kit Verification of Control Movements

Page 12

58025 Hose Kit

Verification of Control Movements

 

 

1. Mount loader to tractor: Remove mount pins

2

from loader uprights. Align tractor with loader and

1

slowly drive tractor into loader. Shut off tractor.

 

2. Connect loader feedline hoses to tractor remote

 

hydraulic couplers. See Figure 12.

 

NOTE: At least 6" spacing should be maintained

 

between valve, bracket, or hoses and any tractor

 

control (brake pedals, accelerator, hand throttle,

 

or hydraulic levers).

 

3. Comply with all Safety Rules and start the tractor.

 

4. Mount loader to tractor by activating bucket cylin-

 

ders to raise or lower the loader uprights into the

 

loader mounts. Slowly advance tractor forward,

 

activating appropriate cylinders to engage loader

 

Control 1, Handle forward -

completely into mounts. Insert mounting pins to

secure loader.

Dump bucket or attachment

5. Check that all hydraulic control lever positions

Control 1, Handle back -

Rollback bucket or attachment

operate the loader movements correctly as

Control 2, Handle forward - Boom down

shown in Figure 15.

6. If loader movements do not respond correctly,

Control 2, Handle back - Boom up

 

shut off tractor, relieve pressure, and reconnect

Figure 15. Tractor Control Operation (Typical)

properly. Loader control movements must be cor-

 

rect before proceeding.

 

7.Once all loader functions are correct, start the tractor and operate the loader to check for leaks. Purge any remaining air from the hydraulic sys- tem.

8.When hose routings and correct loader opera- tions are verified, identify each circuit by placing a matching colored band around the male and female quick-disconnect coupler set. The colored bands will make re-installation easier when the loader is removed from the tractor.

9.Be sure that adequate slack is left in the hoses so they can move as the loader moves through its full range of motion.

10.Attach plastic tie straps every 20" around the hoses to keep them tightly bound and away from contact with the ground or other moving parts on tractor.

11.Before operating the loader, make sure that the Pre-Delivery, Delivery, and Pre-Operation Check- lists in the Loader Operator’s Manual have been completed.

12 Hydraulic Installation

MAN0788 (1/16/2008)

 

 

Image 12
Contents MAN0788 Introduction Model Date of PurchaseSafety Safety RulesMount Installation Loader Mount InstallationTractor Preparation Install Right and Left Mid-Mounts Right Mount InstalledInstall Optional Grill Guard Install Oscillation Stops OptionalHydraulic Installation Hose KIT InstallationGeneral Description Hose Kit Install Fittings and Hoses Install Hydraulic Fitting, Control ValveInstall Loader Hoses Hose Kit Secure Hoses Verify Control MovementsConnect and Route Hoses Tractor Hydraulic CouplersHose Kit Install Hose Brackets Hose Guide InstalledMount loader to tractor Remove mount pins Hose Kit Verification of Control MovementsParts Loader Mounting KITKit are used for this application Parts Bolt Torque Chart InstallationsAppendix Typical WasherBolt Size Chart AbbreviationsWarranty Rev /23/2005 Woods Equipment Company

T5050, T5040, T5060, T5070 specifications

Woods Equipment is renowned for its commitment to quality and innovation in the agricultural sector, and its T-series of tractors, specifically the T5060, T5040, T5070, and T5050 models, exemplify this dedication. Each model in the T-series is designed to cater to the diverse needs of modern farmers by offering robust capabilities, user-friendly features, and advanced technology to enhance productivity and efficiency.

The T5060 model stands out with its powerful engine that delivers exceptional torque and horsepower, making it ideal for varied field tasks. It features a spacious cab designed for operator comfort, equipped with ergonomic controls that ensure ease of use during long hours in the field. The T5060 also incorporates advanced hydraulic systems that allow for quick attachment and detachment of implements, making it a versatile choice for any farming operation.

Similarly, the T5040 model is engineered for reliability and efficiency. This tractor offers a balance of power and fuel economy, which is critical for cost-control in farming operations. The T5040 comes with a robust transmission system that ensures smooth shifting and optimal power delivery, while its heavy-duty chassis provides stability and durability in challenging agricultural environments.

The T5070 model takes performance to the next level with its enhanced engine technology that meets modern emission standards, providing cleaner operation without sacrificing power. This model is particularly noted for its excellent traction and maneuverability, making it suitable for both large-scale and intricate farming tasks. Operators will also appreciate the advanced digital display that monitors essential performance metrics, allowing for informed decision-making in real-time.

Finally, the T5050 model combines cutting-edge technology with easy-to-use features. It is equipped with integrated GPS systems that assist in precision farming, streamlining field operations and improving crop management. The T5050 also features a premium cab with climate control, ensuring that operators remain comfortable regardless of the weather conditions.

In summary, the Woods Equipment T-series tractors—the T5060, T5040, T5070, and T5050—offer powerful performance, advanced technology, and user-centric design. Each model supports farmers in maximizing productivity while enhancing comfort and efficiency on the field. Whether for heavy-duty tasks or precision farming, these tractors represent Woods Equipment's commitment to facilitating agricultural success.