Woods Equipment T5060, T5070, T5040, T5050 Hose Kit Secure Hoses, Verify Control Movements

Page 9

1028835 Hose Kit

Secure Hoses

Secure hoses to the back of right loader upright using plastic tie as shown in Figure 9.

Do not cinch hoses tight, they need to move with the loader during operation.

Figure 9. Secure Hoses

Verify Control Movements

1.Mount loader to tractor: Remove mount pins from loader uprights. Align tractor with loader and slowly drive tractor into loader. Shut off tractor.

2.Connect loader feedline hoses to tractor control valve couplers following color shown in Figure 8.

3.Comply with all safety rules and start the tractor.

4.Mount loader to tractor by activating bucket cylin- ders to raise or lower the loader uprights into the loader mounts. Slowly advance tractor forward, activating appropriate cylinders to engage loader completely into mounts. Insert mounting pins to secure loader.

5.Check that all tractor hydraulic control lever posi- tions operate the loader movements correctly. See Figure 10.

6.If loader movements do not respond correctly, shut off tractor, relieve pressure, and reconnect properly. Loader control movements must be cor- rect before proceeding.

7.Once all loader functions are correct, start the tractor and operate the loader to check for leaks. Purge any remaining air from the hydraulic sys- tem and check oil level.

8.When hose routings and correct loader opera- tions are verified, identify each circuit by placing a matching colored band around the male and female quick-disconnect coupler. The color-coded bands will make reinstallation easier when the loader is removed from tractor.

9.Attach the plastic tie straps (included in kit) every 20-inches around the hoses to keep them tightly bundled and away from contact with the ground or other moving parts on the tractor or loader.

10.Before operating the loader, make sure that the Pre-Delivery, Delivery, and Pre-Operation Check- lists in the Loader Operator’s Manual have been completed.

Handle forward - Boom down

Handle forward to limit - Float position

Handle back - Boom up

Handle right -

Dump bucket or attachment (slow)

Handle right to limit -

Dump bucket or attachment (fast)

Handle to left - Rollback bucket or attachment

Figure 10. Single Lever Control Operation

MAN0788 (1/16/2009)

Hydraulic Installation 9

 

 

Image 9
Contents MAN0788 Model Date of Purchase IntroductionSafety Rules SafetyMount Installation Loader Mount InstallationTractor Preparation Right Mount Installed Install Right and Left Mid-MountsInstall Oscillation Stops Optional Install Optional Grill GuardHydraulic Installation Hose KIT InstallationGeneral Description Hose Kit Install Fittings and Hoses Install Hydraulic Fitting, Control ValveInstall Loader Hoses Verify Control Movements Hose Kit Secure HosesTractor Hydraulic Couplers Connect and Route HosesHose Guide Installed Hose Kit Install Hose BracketsHose Kit Verification of Control Movements Mount loader to tractor Remove mount pinsLoader Mounting KIT PartsKit are used for this application Parts Installations Bolt Torque ChartAppendix Typical WasherAbbreviations Bolt Size ChartWarranty Rev /23/2005 Woods Equipment Company

T5050, T5040, T5060, T5070 specifications

Woods Equipment is renowned for its commitment to quality and innovation in the agricultural sector, and its T-series of tractors, specifically the T5060, T5040, T5070, and T5050 models, exemplify this dedication. Each model in the T-series is designed to cater to the diverse needs of modern farmers by offering robust capabilities, user-friendly features, and advanced technology to enhance productivity and efficiency.

The T5060 model stands out with its powerful engine that delivers exceptional torque and horsepower, making it ideal for varied field tasks. It features a spacious cab designed for operator comfort, equipped with ergonomic controls that ensure ease of use during long hours in the field. The T5060 also incorporates advanced hydraulic systems that allow for quick attachment and detachment of implements, making it a versatile choice for any farming operation.

Similarly, the T5040 model is engineered for reliability and efficiency. This tractor offers a balance of power and fuel economy, which is critical for cost-control in farming operations. The T5040 comes with a robust transmission system that ensures smooth shifting and optimal power delivery, while its heavy-duty chassis provides stability and durability in challenging agricultural environments.

The T5070 model takes performance to the next level with its enhanced engine technology that meets modern emission standards, providing cleaner operation without sacrificing power. This model is particularly noted for its excellent traction and maneuverability, making it suitable for both large-scale and intricate farming tasks. Operators will also appreciate the advanced digital display that monitors essential performance metrics, allowing for informed decision-making in real-time.

Finally, the T5050 model combines cutting-edge technology with easy-to-use features. It is equipped with integrated GPS systems that assist in precision farming, streamlining field operations and improving crop management. The T5050 also features a premium cab with climate control, ensuring that operators remain comfortable regardless of the weather conditions.

In summary, the Woods Equipment T-series tractors—the T5060, T5040, T5070, and T5050—offer powerful performance, advanced technology, and user-centric design. Each model supports farmers in maximizing productivity while enhancing comfort and efficiency on the field. Whether for heavy-duty tasks or precision farming, these tractors represent Woods Equipment's commitment to facilitating agricultural success.