Woods Equipment T5040, T5070 Install Optional Grill Guard, Install Oscillation Stops Optional

Page 6

Install Optional Grill Guard

1.Attach grill guard support bracket (A) to the front of the tractor using four cap screws (K), hardened flat washers (G), two spacers (C) and hex nuts (L)

2.Attach grill guard (B) to support bracket (A) using two (one per side) cap screw (E), four hardened flat washers (H) and hex nuts (D).

NOTE: Do not overtighten cap screws (E); grill guard must be able to pivot for access to the battery.

3.Rotate grill guard up and secure into position using two clevis pins (F) and lynch pins (J).

4.Torque cap screws (K) to 244 lbs-ft (330 N-m).

A.1028909 Grill guard support bracket

B.1028912 Grill guard

C.1028919 Grill guard spacer

D.230 5/8 NC Hex nut

E.902 5/8 NC x 2 HHCS GR5

F.26299 Clevis pin, 3/4 x 2

G.57798 3/4 Hardened flat washer H. 57817 5/8 Hardened flat washer

J. 304075 Lynch pin, 1/4

Figure 4. Grill Guard Installation

K.307554 M20 x 2.5P x 60 HHCS

L.307913 M20 x 2.5P Hex nut

Install Oscillation Stops (Optional)

Oscillation stops are not required on all tractors. To determine if stops are needed:

Check tire clearance after loader has been installed.

Raise front tires off the ground and oscillate front axle up and down, turning the tires in both direc- tions.

If tires contact loader or loader mount, oscillation stops will be required.

1.Remove the two from cap screws on loader mount. Place oscillation stop over mount and secure using two cap screws (11) and hardened flat washer previously removed.

2.Repeat steps to install oscillation stop on opposite side of tractor.

3.Torque cap screws (11) to 374 lbs-ft (507 N-m).

1.1026397 Left oscillation stop

2.1026398 Right oscillation stop

Figure 5. Right Oscillation Stop Installation

10.1006371 3/4 Hardened flat washer, extra thk

11.1028950 M20 x 2.5P x 80 mm HHCS CL10.9 (used with oscillation stops only)

6 Mount Installation

MAN0788 (1/16/2009)

 

 

Image 6
Contents MAN0788 Introduction Model Date of PurchaseSafety Safety RulesMount Installation Loader Mount InstallationTractor Preparation Install Right and Left Mid-Mounts Right Mount InstalledInstall Optional Grill Guard Install Oscillation Stops OptionalHydraulic Installation Hose KIT InstallationGeneral Description Hose Kit Install Fittings and Hoses Install Hydraulic Fitting, Control ValveInstall Loader Hoses Hose Kit Secure Hoses Verify Control MovementsConnect and Route Hoses Tractor Hydraulic CouplersHose Kit Install Hose Brackets Hose Guide InstalledMount loader to tractor Remove mount pins Hose Kit Verification of Control MovementsParts Loader Mounting KITKit are used for this application Parts Appendix Bolt Torque ChartInstallations Typical WasherBolt Size Chart AbbreviationsWarranty Rev /23/2005 Woods Equipment Company

T5050, T5040, T5060, T5070 specifications

Woods Equipment is renowned for its commitment to quality and innovation in the agricultural sector, and its T-series of tractors, specifically the T5060, T5040, T5070, and T5050 models, exemplify this dedication. Each model in the T-series is designed to cater to the diverse needs of modern farmers by offering robust capabilities, user-friendly features, and advanced technology to enhance productivity and efficiency.

The T5060 model stands out with its powerful engine that delivers exceptional torque and horsepower, making it ideal for varied field tasks. It features a spacious cab designed for operator comfort, equipped with ergonomic controls that ensure ease of use during long hours in the field. The T5060 also incorporates advanced hydraulic systems that allow for quick attachment and detachment of implements, making it a versatile choice for any farming operation.

Similarly, the T5040 model is engineered for reliability and efficiency. This tractor offers a balance of power and fuel economy, which is critical for cost-control in farming operations. The T5040 comes with a robust transmission system that ensures smooth shifting and optimal power delivery, while its heavy-duty chassis provides stability and durability in challenging agricultural environments.

The T5070 model takes performance to the next level with its enhanced engine technology that meets modern emission standards, providing cleaner operation without sacrificing power. This model is particularly noted for its excellent traction and maneuverability, making it suitable for both large-scale and intricate farming tasks. Operators will also appreciate the advanced digital display that monitors essential performance metrics, allowing for informed decision-making in real-time.

Finally, the T5050 model combines cutting-edge technology with easy-to-use features. It is equipped with integrated GPS systems that assist in precision farming, streamlining field operations and improving crop management. The T5050 also features a premium cab with climate control, ensuring that operators remain comfortable regardless of the weather conditions.

In summary, the Woods Equipment T-series tractors—the T5060, T5040, T5070, and T5050—offer powerful performance, advanced technology, and user-centric design. Each model supports farmers in maximizing productivity while enhancing comfort and efficiency on the field. Whether for heavy-duty tasks or precision farming, these tractors represent Woods Equipment's commitment to facilitating agricultural success.