INSTALLATIONS
Installing the Memory
The IB810 CPU Card supports two DDR memory sockets for a maximum total memory of 2GB in DDR memory type. The memory module capacities supported are 64MB, 128MB, 256MB, 512MB and 1GB.
Installing and Removing Memory Modules
To install the DDR modules, locate the memory slot on the CPU card and perform the following steps:
1.Hold the DDR module so that the two keys of the DDR module align with those on the memory slot.
2.Gently push the DDR module in an upright position until the clips of the slot close to hold the DDR module in place when the DDR module touches the bottom of the slot.
3.To remove the DDR module, press the clips with both hands.
Lock 
DDR Module | Lock |
Lock | Lock |
Top View of DDR Socket
8 | IB810 User’s Manual |
