Socket Mobile IB810 IDE Primary/Secondary Master/Slave Udma, USB Controller, USB Keyboard Support

BIOS SETUP

IDE Primary/Secondary Master/Slave UDMA

These fields allow your system to improve disk I/O throughput to 33Mb/sec with the Ultra DMA/33 feature. The options are Auto and Disabled.

USB Controller

The options for this field are Enabled and Disabled. By default, this field is set to Enabled.

USB Keyboard Support

The options for this field are Enabled and Disabled. By default, this field is set to Disabled.

AC97 Audio

The default setting of the AC97 Audio is Auto.

Init Display First

This field allows the system to initialize first the VGA card on chip or the display on the PCI Slot. By default, the PCI Slot VGA is initialized first.

IDE HDD Block Mode

This field allows your hard disk controller to use the fast block mode to transfer data to and from your hard disk drive.

Power On Function

This field sets how the system can be powered on from a system off state. The default setting is Button Only.

Onboard FDC Controller

Select Enabled if your system has a floppy disk controller (FDC) installed on the CPU card and you wish to use it. If you install an add-in FDC or the system has no floppy drive, select Disabled in this field. This option allows you to select the onboard FDD port.

Onboard Serial/Parallel Port

These fields allow you to select the onboard serial and parallel ports and their addresses. The default values for these ports are:

Serial Port 1	3F8/IRQ4
Serial Port 2	2F8/IRQ3
Parallel Port	378H/IRQ7

IB810 User’s Manual 41