Socket Mobile IB810 user manual J2 ATX 12V/+12V Power Connector, IDE1, IDE2 Eide Connectors

INSTALLATIONS

Hard Disk Drive LED Connector: Pins 10 and 20 This connector connects to the hard drive activity LED on control panel. This LED will flash when the HDD is being accessed.

								Pin #		Signal Name
								10			HDD Active
								20				5V
J2: ATX 12V/+12V Power Connector
					Pin #	Signal Name
					1		Ground
					2		Ground
					3			+12V
					4			+12V
IDE1, IDE2: EIDE Connectors
		IDE1: Primary IDE Connector
			Signal Name			Pin #			Pin #			Signal Name
				Reset IDE		1			2			Ground
				Host data 7		3			4			Host data 8
				Host data 6		5			6			Host data 9
				Host data 5		7			8			Host data 10
				Host data 4		9			10			Host data 11
				Host data 3		11			12			Host data 12
				Host data 2		13			14			Host data 13
				Host data 1		15			16			Host data 14
				Host data 0		17			18			Host data 15
				Ground		19			20			Protect pin
				DRQ0		21			22			Ground
				Host IOW		23			24			Ground
				Host IOR		25			26			Ground
				IOCHRDY		27			28			Host ALE
	IDE1
				DACK0		29			30			Ground
				IRQ14		31			32			No connect
				Address 1		33			34			No connect
				Address 0		35			36			Address 2
			Chip select 0			37			38			Chip select 1
				Activity		39			40			Ground

18 IB810 User’s Manual