DRIVERS INSTALLATION
6.The Setup program has now completed installation. Click Finish for the computer to restart and changes to take effect.
7.After the system has restarted, a screen would appear showing some installation information. Restart the system when prompted to complete the audio driver installation.
PCI Ethernet Drivers
The first thing to do to install the Ethernet drivers is to create a floppy diskette that would contain the drivers. Follow the steps below.
1.Insert the CD that comes with your IB810. In the initial screen, click on LAN Card, then click on Intel PRO LAN Drivers.
2.In the Create Install Disk window, choose the operating system that you are using. In this case, Windows NT. Use the created diskette to install the Ethernet/LAN drivers.
3.Under the Windows NT 4.0 environment, click Start à Control Panel. Double click Network à Adapters à Add.
4.Select “Have disk … ” and insert the floppy diskette containing the Ethernet drivers for Windows NT 4.0 into the FDD drive, then click OK.
5.Click OK à Close, and then enter IP address.
6.Restart the system for changes to take effect.
NOTE: You may also directly use the floppy disks containing the Ethernet drivers instead of creating the Install Disks from the CD.
68 | IB810 User’s Manual |
