Safety Rules

ATTENTION! BECOME ALERT! YOUR SAFETY IS INVOLVED!

!LEA EL INSTRUCTIVO!

Si no lee Ingles, pida ayuda a alguien que si lo lea para que le traduzca las medidas de seguridad.

Safety is a primary concern in the design and manufacture of our products. Unfortunately, our efforts to provide safe equipment can be wiped out by an operator’s single careless act.

In addition to the design and configuration of equipment, hazard control and accident preven- tion are dependent upon the awareness, con- cern, judgement, and proper training of personnel involved in the operation, transport, maintenance, and storage of equipment.

It has been said, “The best safety device is an informed, careful operator.” We ask you to be that kind of operator.

INSTALLATION

This Loader Mounting Kit is to be used only for the loaders and tractors specified in this manual. Any other use or modification of this mounting kit may result in serious injury or death.

Hydraulics must be connected as instructed in this manual. Do not substitute parts, modify, or connect in any other way.

After connecting hoses, check that all control lever positions function as instructed in the Opera- tor's Manual. Do not put into service until control lever and equipment movements are correct.

Safety instructions are important! Read all attachment and power unit manuals; follow all safety rules and safety decal information. (Replace- ment manuals and safety decals are available from your dealer. To locate your nearest dealer, check the Dealer Locator at www.WoodsEquipment.com, or in the United States and Canada call 1-800-319- 6637.) Failure to follow instructions or safety rules can result in serious injury or death.

Keep hands and body away from pressurized lines. Use paper or cardboard, not hands or other body parts to check for leaks. Wear safety goggles. Hydraulic fluid under pressure can easily penetrate skin and will cause serious injury or death.

Make sure that all operating and service person- nel know that if hydraulic fluid penetrates skin, it

must be surgically removed as soon as possible by a doctor familiar with this form of injury or gan- grene, serious injury, or death will result. CON-

TACT A PHYSICIAN IMMEDIATELY IF FLUID ENTERS SKIN OR EYES. DO NOT DELAY.

Check that all hardware is properly installed. Always tighten to torque chart specifications unless instructed otherwise in this manual.

Air in hydraulic systems can cause erratic oper- ation and allows loads or equipment components to drop unexpectedly. When connecting equipment or hoses or performing any hydraulic maintenance, purge any air in hydraulic system by operating all hydraulic functions several times. Do this before putting into service or allowing anyone to approach the equipment.

Protective hose sleeves must cover all hydrau- lic hoses within 20 inches of the operator and be secured onto metal hose fittings. Replace hoses or sleeves if damaged or if protective sleeve cannot be properly positioned or secured.

Make sure all hydraulic hoses, fittings, and valves are in good condition and not leaking before starting power unit or using equipment. Check and route hoses carefully to prevent damage. Hoses must not be twisted, bent sharply, kinked, frayed, pinched, or come into contact with any moving parts. Operate moveable components through full operational range to check clearances. Replace any damaged hoses immediately.

Always wear relatively tight and belted clothing to avoid getting caught in moving parts. Wear sturdy, rough-soled work shoes and protective equipment for eyes, hair, hands, hearing, and head; and respirator or filter mask where appropriate.

Do not modify or alter or permit anyone else to modify or alter the equipment or any of its compo- nents in any way.

Do not allow bystanders in the area when oper- ating, attaching, removing, assembling, or servic- ing equipment.

Use a suitable lifting device of sufficient capac- ity. Use adequate personnel to handle heavy com- ponents.

Keep all persons away from operator control area while performing adjustments, service, or maintenance.

Loader Mounting Kit SR3 (4/25/2003)

Safety 3

T5050, T5040, T5060, T5070 specifications

Woods Equipment is renowned for its commitment to quality and innovation in the agricultural sector, and its T-series of tractors, specifically the T5060, T5040, T5070, and T5050 models, exemplify this dedication. Each model in the T-series is designed to cater to the diverse needs of modern farmers by offering robust capabilities, user-friendly features, and advanced technology to enhance productivity and efficiency.

The T5060 model stands out with its powerful engine that delivers exceptional torque and horsepower, making it ideal for varied field tasks. It features a spacious cab designed for operator comfort, equipped with ergonomic controls that ensure ease of use during long hours in the field. The T5060 also incorporates advanced hydraulic systems that allow for quick attachment and detachment of implements, making it a versatile choice for any farming operation.

Similarly, the T5040 model is engineered for reliability and efficiency. This tractor offers a balance of power and fuel economy, which is critical for cost-control in farming operations. The T5040 comes with a robust transmission system that ensures smooth shifting and optimal power delivery, while its heavy-duty chassis provides stability and durability in challenging agricultural environments.

The T5070 model takes performance to the next level with its enhanced engine technology that meets modern emission standards, providing cleaner operation without sacrificing power. This model is particularly noted for its excellent traction and maneuverability, making it suitable for both large-scale and intricate farming tasks. Operators will also appreciate the advanced digital display that monitors essential performance metrics, allowing for informed decision-making in real-time.

Finally, the T5050 model combines cutting-edge technology with easy-to-use features. It is equipped with integrated GPS systems that assist in precision farming, streamlining field operations and improving crop management. The T5050 also features a premium cab with climate control, ensuring that operators remain comfortable regardless of the weather conditions.

In summary, the Woods Equipment T-series tractors—the T5060, T5040, T5070, and T5050—offer powerful performance, advanced technology, and user-centric design. Each model supports farmers in maximizing productivity while enhancing comfort and efficiency on the field. Whether for heavy-duty tasks or precision farming, these tractors represent Woods Equipment's commitment to facilitating agricultural success.