Woods Equipment RCC42 manual Dealer Check Lists, PRE-DELIVERY Check List, Delivery Check List

Page 36

DEALER CHECK LISTS

PRE-DELIVERY CHECK LIST

(DEALER’S RESPONSIBILITY)

NOTICE

■Gearbox was not filled at the factory. It must be serviced before operating cutter. (See Gearbox Oil Fill, page 29.) Failure to service will result in dam- age to gearbox.

Inspect cutter thoroughly after assembly to make sure it is set up properly before delivering it to the customer. The following check list is a reminder of points to inspect. Check off each item as it is found satisfactory, corrections are made, or services are performed.

___

Check all bolts to be sure they are properly

 

torqued.

___

Check that all cotter pins are properly installed

 

and secured.

___

Check that PTO shaft is properly installed.

___

Check that gearbox is properly serviced and

 

seals are not leaking.

___

Check and grease all lubrication points as identi-

 

fied in Owner Service, Lubrication Information,

 

page 16.

___

Check that blades have been properly installed.

DELIVERY CHECK LIST

(DEALER’S RESPONSIBILITY)

___ Show customer how to make adjustments. Describe the options available for this cutter and explain their purpose.

___ Explain importance of lubrication to customer and point out lubrication points on cutter.

___ Point out all guards and shielding. Explain their importance and the safety hazards that exist when not kept in place and in good condition.

For mounted units, add wheel weights, ballast in front tires, and/or front tractor weight to enhance front end stability. A minimum 20% of tractor and equipment gross weight must be on front tractor wheels. When adding weight to attain 20% of tractor and equipment weight on front tractor wheels, you must not exceed the ROPS weight certification. Weigh the tractor and equipment. Do not estimate!

___ Present Operator's Manual and request that cus- tomer and all operators read it before operating equipment. Point out the manual safety rules, explain their meanings and emphasize the increased safety hazards that exist when safety rules are not followed.

___ Explain to customer that when equipment is transported on a road or highway, safety devices should be used to give adequate warning to oper- ators of other vehicles.

36 Dealer Check Lists

MAN0224 (Rev. 7/29/2005)

 

 

Page 35 Page 37
Image 36
Page 35 Page 37
Contents Rotary Cutters Introduction To the DealerTable of Contents LEA EL InstructivoSpecifications General InformationFree Mower Safety Video SafetyTraining Package for Rotary Mowers/Cutters-English Training Package for Rotary Mowers/Cutters-English/SpanishSafety Rules TrainingPreparation OperationMaintenance TransportationStorage Safety & Instructional Decals Replace Immediately If DamagedKeep Away Operation OperationAttaching Cutter to Tractor Installation Removal of Driveline Tractor PTO Cutting Height AdjustmentTOP Link Adjustment Figure ShreddingQuick Hitch Attachment Figure Operating TechniquePRE-OPERATION Check List Owners Responsibility Owner Service Owner ServiceBlocking Method Lubrication InformationServicing Blades Removing BladesInstalling Blades Figure Sharpening BladesComer WalterscheidWalterscheid ModelRepairing Shielding CleaningReplacing Shear Bolts After Each UseTroubleshooting TroubleshootingMowing Conditions Dealer Service Dealer ServiceGearbox Maintenance Seal Replacement FigureSeal Repair On Flat TOP, Gearbox S/N Before Gearbox Repair On Flat TOP, Gearbox S/N BeforeReinstall Gearbox Reassemble GearboxGearbox Assembly Flat Top Cast/Crown Top Gearbox Assembly Reassemble Gearbox Cast Top Crossbar Removal Crossbar RemovalCrossbar Installation Joint DisassemblyUniversal Joint Repair Joint Assembly Dealer Service Assembly Assembly InstructionsDealer SET-UP Instructions Install Slip Clutch Driveline Driveline to gearboxOptional Slip Clutch Driveline Assembly Shorten Driveline for Specific TractorInstall Chain Shielding Optional Fill Gearbox OilDealer Check Lists Dealer Check ListsPRE-DELIVERY Check List Delivery Check ListRotary Cutters PartsRCC42 Assembly RCC42 Parts List Part QTY DescriptionGearbox Assembly Flat TOP Gearbox Assembly Parts List Flat TOP REF Part QTY DescriptionGearbox Assembly CAST/CROWN TOP RCC42 Shear Bolt Driveline TWO Lobe Walterscheid RCC42 Standard Driveline Comer RCC42 Slip Clutch Driveline Optional Walterscheid RCC42 Slip Clutch Driveline Optional Comer Front & Rear Chain Shielding Optional Bolt Torque Chart SAE Series Torque ChartAppendix Metric SeriesBolt Size Chart AbbreviationsIndex IndexWarranty Rev /23/2005

RCC42 specifications

Woods Equipment has long been recognized for its commitment to quality and performance in the field of agricultural and landscape equipment. One standout product that reflects this dedication is the Woods RCC42. This rotary cutter, designed for robust performance, is particularly suitable for handling various mowing tasks, making it a favorite among professionals and avid gardeners alike.

At the heart of the Woods RCC42 is its durable construction. Made from high-quality materials, this rotary cutter is built to withstand the rigors of heavy use. Its heavy-duty frame ensures stability and longevity, ideal for tackling tough brush and dense vegetation. The RCC42 features a wide cutting width of 42 inches, allowing users to cover more ground quickly while ensuring a clean and even cut.

One of the key features of the Woods RCC42 is its superior cutting capability, which comes from its specially designed blades. The rotary cutter is equipped with sharp, high-carbon steel blades that can easily slice through even the thickest grass and brush. The blades are positioned in a way that optimizes cutting efficiency, ensuring that the mower leaves behind a finely cut finish, whether you are mowing a field or maintaining a garden.

In terms of technology, the Woods RCC42 is designed with user-friendliness in mind. The cutter is engineered to be easily attached to a variety of compact tractors, making it a versatile option for many users. Its adjustable cutting height feature allows operators to set the cutter to their desired height, accommodating different mowing conditions and vegetation types. Additionally, the RCC42 operates smoothly and quietly, making it a pleasant option for those who wish to work for extended periods without excessive noise.

Safety is another paramount consideration with the Woods RCC42. The cutter features a shielded design that provides protection to the operator while preventing debris from being ejected during operation. This thoughtful design element minimizes risks, making it a safer choice for users of all experience levels.

Overall, the Woods RCC42 rotary cutter exemplifies a balance of durability, efficiency, and user-friendly technology. Whether you are a professional landscaper or a homeowner looking to maintain your property, the RCC42 offers the reliability and performance needed to tackle even the toughest mowing jobs with ease. With its proven track record, the Woods RCC42 continues to be a benchmark in rotary cutting equipment, enhancing productivity and ensuring satisfaction for those who rely on it.
Top Page Image Contents