Woods Equipment RD990X manual Dealer Service, Blade Spindle Service, Spindle Removal

Page 22

DEALER SERVICE

The information in this section is written for dealer ser- vice personnel. The repair described here requires special skills and tools. If your shop is not properly equipped or your mechanics are not properly trained in this type of repair, you may be time and money ahead to replace complete assemblies.

„Before working underneath, read manual instructions, securely block up, and check stability. Secure blocking prevents equipment from drop- ping due to hydraulic leak down, hydraulic system failure, or mechanical component failure.

„Keep all persons away from operator control area while performing adjustments, service, or maintenance.

CAUTION

„Always wear relatively tight and belted clothing to avoid getting caught in moving parts. Wear sturdy, rough-soled work shoes and protective equipment for eyes, hair, hands, hearing, and head; and respirator or filter mask where appropriate.

BLOCKING METHOD

See "Blocking Method" instructions on page 15.

BLADE SPINDLE SERVICE

Spindle repair requires special skills and tools. If your shop is not properly equipped or your mechanics are not trained in this type of repair, you may be time and money ahead to use a new spindle assembly.

For reference, the grease fitting is in the top of the spin- dle shaft.

Permatex® 3D Aviation Form-A-Gasket or equivalent is recommended as a sealant.

Spindle Removal

1.Remove blade (11) from spindle (7).

2.Remove belt from pulleys.

3.Remove jam nut (16) and washer (15) from top of spindle shaft, Figure 15.

4.Disassemble split taper bushing (13) (located on top of pulley) by removing the two bolts and key (14).

5.Insert bolts into the threaded holes of bushing flange.

6.Tighten bolts alternately to remove split taper bushing.

7.Remove pulley (12).

8.Remove bolts that attach spindle to mower frame and remove spindle.

9.Remove grease fitting (17) from top of shaft.

5. Spindle Housing

7.Spindle Shaft and Crossbar

8.Blade Lock

9.Blade Pin

10.1/2NC x 3/4 Nylock HHCS

11.Blade

12.Sheave

13.Bushing

14.Key

15.1" Lock Washer

16.1NC Jam Nut

17.Grease Fitting

Figure 15. Sheave and Blade Assembly

Spindle Disassembly

1.Place spindle assembly in press and press shaft down through housing.

2.Remove seals from housing.

3.Remove bearing cups from housing by placing a punch in the slots provided and driving them out. Alternate punch positions from side to side. Take care to prevent housing damage.

22 Dealer Service

MAN0845 (1/12/2011)

 

 

Image 22
Contents Rearmount Mowers Introduction To the DealerTable of Contents LEA EL InstructivoGeneral Information SpecificationsRD990X Training SafetySafety Rules PreparationMaintenance TransportationStorage Safety & Instructional Decals Be Careful33347E Tractor Stability OperationOperation Attaching Mower to TractorCutting Height Adjustment Refer to FigureTractor TOP Link Adjustment Cutting Height ChartOperating Technique Front Caster Wheel Interference CheckFront Roller Optional Operating TipsMower Removal & Storage Uneven TerrainOwner PRE-OPERATION Check List Blocking Method Owner ServiceOwner Service Lubrication InformationDescription Frequency Belt Installation Belt ServiceBelt Replacement Blade ServiceChain Shielding Blade InstallationCleaning Blade SharpeningTrouble Shooting TroubleshootingMowing Conditions Belt Conditions Troubleshooting Blade Spindle Service Dealer ServiceDealer Service Spindle DisassemblySpindle Assembly Spindle InstallationSeal Installation Seal ReplacementGearbox Repair Horizontal Shaft Seal Replacement Vertical Shaft Seal ReplacementGearbox Removal from Mower Gearbox Disassembly Gearbox ReassemblyJoint Disassembly Gearbox InstallationDrive Sheave Installation Universal Joint RepairJoint Assembly Install Front Casters Figure AssemblyAssembly Instructions Dealer SET-UP InstructionsTorque Caster Arms Install Hitch ArmsInstall Driveshaft Fill GearboxInstall Chain Shielding Install Front Roller OptionalInstall Quick Hitch Optional Quick Hitch Kit Installation OptionalPRE-DELIVERY Check List Dealer Check ListsDealer Check Lists Delivery Check ListMAN0845 1/12/2011 Parts Index PartsRD990X Main Frame Assembly Part QTY Description RD990X Gearbox Assembly NSSRD990X Drive Shaft Assembly RD900X Blade & Spindle Assembly RD990X Chain Shielding Assembly RD990X Front Roller Assembly Optional Quick Hitch KIT OptionalMetric Series Torque Chart Bolt Torque ChartSAE Series Torque Chart AppendixBolt Size Chart AbbreviationsIndex IndexWarranty Rev /23/2005 MAN0845

RD990X specifications

The Woods Equipment RD990X is a robust rotary mower designed for heavy-duty performance in various applications, making it an ideal choice for landscapers, agricultural professionals, and property managers alike. With its superior build quality and innovative features, the RD990X stands out in the competitive market of rotary mowers.

One of the main features of the RD990X is its powerful cutting capability. Equipped with a high-performance engine, this mower is engineered to sustain tough mowing conditions, whether in dense grass, thick brush, or uneven terrain. The RD990X has a wide cutting deck that ensures efficient mowing, reducing mowing time significantly. The adjustable cutting height allows users to tailor their mowing to their specific needs, offering versatility across different landscapes.

Another notable aspect of the RD990X is its durable construction. The mower's heavy-duty steel frame is designed to withstand wear and tear, ensuring longevity even in rugged environments. The reinforced cutting deck not only provides strength but also enhances safety during operation. Additionally, the RD990X incorporates innovative technologies like blade brake systems, which provide instant stopping power to the blades when the operator disengages the mower. This feature increases safety and provides peace of mind while mowing.

The RD990X is also designed with user comfort in mind. Its ergonomic controls are easily accessible, allowing for smooth operation without straining. The mower's design allows for excellent visibility, giving operators confidence while navigating around obstacles. Enhanced maneuverability is also a highlight, enabling tight turns and precise trimming in challenging areas.

Moreover, the RD990X integrates advanced technologies such as GPS tracking and fuel efficiency monitoring, optimizing performance and operational costs. Its compatibility with various attachments expands its functionality, allowing it to perform multiple tasks beyond mowing, such as mulching and side discharge.

In summary, the Woods Equipment RD990X is a top-tier rotary mower distinguished by its powerful performance, durable build, ergonomic design, and cutting-edge technology. Whether tackling large fields or maintaining landscaped areas, the RD990X is engineered to deliver exceptional results, making it a reliable choice for all mowing needs. With its outstanding features and versatility, it holds a significant position in the market, promising both efficiency and effectiveness for users across various industries.