Woods Equipment RD990X manual Dealer Check Lists, PRE-DELIVERY Check List, Delivery Check List

Page 33

DEALER CHECK LISTS

PRE-DELIVERY CHECK LIST

(DEALER’S RESPONSIBILITY)

 

 

Inspect the equipment thoroughly after assembly to

___

Check all bolts to be sure they are properly

ensure it is set up properly before delivering it to the

 

torqued.

customer.

___

Check that all cotter pins and safety pins are

 

 

The following check lists are a reminder of points to

 

properly installed. Replace if damaged.

inspect. Check off each item as it is found satisfactory

___

Check and grease all lubrication points as iden-

or after proper adjustment is made.

 

tified in “Lubrication Information” on page 15.”

 

 

 

___

Check that all safety decals are installed and in

___

Gearboxes are not filled at the factory. Prior to

 

good condition. Replace if damaged.

 

 

delivery, fill as specified in the “Owner Service,

 

 

 

___

Check that shields and guards are properly

 

lubrication information” on page 15 and check to

 

installed and in good condition. Replace if dam-

 

see that there are no leaking seals.

 

aged.

___

Check that blades have been properly installed.

 

 

DELIVERY CHECK LIST

(DEALER’S RESPONSIBILITY)

___ Show customer how to make adjustments and select proper PTO speed.

___ Instruct customer how to lubricate and explain importance of lubrication.

___ Point out the safety decals. Explain their mean- ing and the need to keep them in place and in good condition. Emphasize the increased safety hazards when instructions are not followed.

___ Present Operator's Manual and request that customer and all operators read it before oper- ating equipment. Point out the manual safety rules, explain their meanings and emphasize the increased safety hazards that exist when safety rules are not followed.

___ Show customer how to make sure driveline is properly installed and that spring-activated lock- ing pin or collar slides freely and is seated in groove on tractor PTO shaft.

___ Show customer the safe, proper procedures to be used when mounting, dismounting, and stor- ing equipment.

___ Explain to customer the potential crushing haz- ards of going underneath raised equipment. Instruct that before going underneath to discon- nect the driveline, securely block up all corners with jack-stands and to follow all instructions in the “Owner Service, Blocking Methods” section of the Operator’s Manual. Explain that blocking up prevents equipment dropping from hydraulic leak down, hydraulic system failures or mechan- ical component failures.

___ For mounted units, add wheel weights, ballast in front tires, and/or front tractor weight to enhance front end stability. A minimum 20% of tractor and equipment gross weight must be on front tractor wheels. When adding weight to attain 20% of tractor and equipment weight on front tractor wheels, you must not exceed the ROPS weight certification. Weigh the tractor and equipment. Do not estimate!

___ Make customer aware of optional equipment available so that customer can make proper choices as required.

___ Point out all guards and shields. Explain their importance and the safety hazards that exist when not kept in place and in good condition.

MAN0845 (1/12/2011)

Dealer Check Lists 33

 

 

Image 33
Contents Rearmount Mowers To the Dealer IntroductionLEA EL Instructivo Table of ContentsSpecifications General InformationRD990X Safety Rules SafetyTraining PreparationTransportation MaintenanceStorage Be Careful Safety & Instructional Decals33347E Operation OperationTractor Stability Attaching Mower to TractorRefer to Figure Cutting Height AdjustmentCutting Height Chart Tractor TOP Link AdjustmentFront Roller Optional Front Caster Wheel Interference CheckOperating Technique Operating TipsUneven Terrain Mower Removal & StorageOwner PRE-OPERATION Check List Owner Service Owner ServiceBlocking Method Lubrication InformationDescription Frequency Belt Replacement Belt ServiceBelt Installation Blade ServiceCleaning Blade InstallationChain Shielding Blade SharpeningTroubleshooting Trouble ShootingMowing Conditions Belt Conditions Troubleshooting Dealer Service Dealer ServiceBlade Spindle Service Spindle DisassemblySpindle Installation Spindle AssemblySeal Replacement Seal InstallationGearbox Repair Vertical Shaft Seal Replacement Horizontal Shaft Seal ReplacementGearbox Removal from Mower Gearbox Reassembly Gearbox DisassemblyDrive Sheave Installation Gearbox InstallationJoint Disassembly Universal Joint RepairJoint Assembly Assembly Instructions AssemblyInstall Front Casters Figure Dealer SET-UP InstructionsInstall Driveshaft Install Hitch ArmsTorque Caster Arms Fill GearboxInstall Front Roller Optional Install Chain ShieldingQuick Hitch Kit Installation Optional Install Quick Hitch OptionalDealer Check Lists Dealer Check ListsPRE-DELIVERY Check List Delivery Check ListMAN0845 1/12/2011 Parts Parts IndexRD990X Main Frame Assembly Part QTY Description NSS RD990X Gearbox AssemblyRD990X Drive Shaft Assembly RD900X Blade & Spindle Assembly RD990X Chain Shielding Assembly Quick Hitch KIT Optional RD990X Front Roller Assembly OptionalSAE Series Torque Chart Bolt Torque ChartMetric Series Torque Chart AppendixAbbreviations Bolt Size ChartIndex IndexWarranty Rev /23/2005 MAN0845

RD990X specifications

The Woods Equipment RD990X is a robust rotary mower designed for heavy-duty performance in various applications, making it an ideal choice for landscapers, agricultural professionals, and property managers alike. With its superior build quality and innovative features, the RD990X stands out in the competitive market of rotary mowers.

One of the main features of the RD990X is its powerful cutting capability. Equipped with a high-performance engine, this mower is engineered to sustain tough mowing conditions, whether in dense grass, thick brush, or uneven terrain. The RD990X has a wide cutting deck that ensures efficient mowing, reducing mowing time significantly. The adjustable cutting height allows users to tailor their mowing to their specific needs, offering versatility across different landscapes.

Another notable aspect of the RD990X is its durable construction. The mower's heavy-duty steel frame is designed to withstand wear and tear, ensuring longevity even in rugged environments. The reinforced cutting deck not only provides strength but also enhances safety during operation. Additionally, the RD990X incorporates innovative technologies like blade brake systems, which provide instant stopping power to the blades when the operator disengages the mower. This feature increases safety and provides peace of mind while mowing.

The RD990X is also designed with user comfort in mind. Its ergonomic controls are easily accessible, allowing for smooth operation without straining. The mower's design allows for excellent visibility, giving operators confidence while navigating around obstacles. Enhanced maneuverability is also a highlight, enabling tight turns and precise trimming in challenging areas.

Moreover, the RD990X integrates advanced technologies such as GPS tracking and fuel efficiency monitoring, optimizing performance and operational costs. Its compatibility with various attachments expands its functionality, allowing it to perform multiple tasks beyond mowing, such as mulching and side discharge.

In summary, the Woods Equipment RD990X is a top-tier rotary mower distinguished by its powerful performance, durable build, ergonomic design, and cutting-edge technology. Whether tackling large fields or maintaining landscaped areas, the RD990X is engineered to deliver exceptional results, making it a reliable choice for all mowing needs. With its outstanding features and versatility, it holds a significant position in the market, promising both efficiency and effectiveness for users across various industries.