Woods Equipment RD990X manual Assembly Instructions, Dealer SET-UP Instructions

Page 29

ASSEMBLY INSTRUCTIONS

DEALER SET-UP INSTRUCTIONS

Assembly of this mower is the responsibility of the Woods dealer. If should be delivered to the owner com- pletely assembled, lubricated, and adjusted for normal cutting conditions.

Complete Dealer Check Lists on page 33 when you have completed the assembly.

The mower is shipped partially assembled. Assembly will be easier if components are aligned and loosely assembled before tightening hardware. Recommended torque values for hardware are located on page 43.

Select a suitable working area. Open parts boxes and lay out parts and hardware to make location easy. Refer to illustrations, accompanying text, parts lists and exploded view drawings.

„Before working underneath, carefully read Oper- ator’s Manual instructions, disconnect driveline, raise mower, securely block up all corners with jackstands, and check stability. Secure blocking prevents equipment from dropping due to hydrau- lic leak down, hydraulic system failures, or mechanical component failures.

CAUTION

„Always wear relatively tight and belted clothing to avoid getting caught in moving parts. Wear sturdy, rough-soled work shoes and protective equipment for eyes, hair, hands, hearing, and head; and respirator or filter mask where appropriate.

1. Wood Blocks

2. Chain Shielding

3. Rear Shipping Bracket

4. Front Shipping Bracket

5. PTO Hanger

6. Diagonal Brace

7. A-Frame Bar

8. U-Link

9. Sleeve

10. Caster Arms

11. Hitch Arms

12. 1/2 NC x 1-1/2 HHCS

13. 1/2 NC x 4 HHCS

14. 1/2 NC x 6-1/2 HHCS

15. 1/2 NC Flange Lock Nut

16. 5/8 NC x 3-1/2 HHCS

17. 5/8 NC Flange Lock Nut

Figure 28. Shipping Unit

Disassemble Shipping Unit (Figure 28)

1.Remove all parts that are wired and strapped to mower.

2.Remove wood blocks (1) and chain shielding (2) attached to front of mower. Discard blocks.

3.Remove cap screws (12) and lock nuts (15) from rear shipping bracket (3). Discard bracket.

4.Remove cap screw (14) and lock nuts (15) from front shipping bracket (4). Discard bracket and

replace hardware through PTO hanger (5), diagonal braces (6), A-frame bars (7), U-link (8) and sleeve (9). Do not over tighten lock nut against the PTO hanger. PTO hanger should rotate freely.

Install Front Casters (Figure 28)

1.Remove cap screws (13) and lock nuts (15) from outer caster arms (10).

2.Place arms inside of pockets in front corners of deck. Replace hardware.

MAN0845 (1/12/2011)

Assembly 29

 

 

Image 29
Contents Rearmount Mowers To the Dealer IntroductionLEA EL Instructivo Table of ContentsRD990X SpecificationsGeneral Information Safety Rules SafetyTraining PreparationTransportation MaintenanceStorage Be Careful Safety & Instructional Decals33347E Operation OperationTractor Stability Attaching Mower to TractorRefer to Figure Cutting Height AdjustmentCutting Height Chart Tractor TOP Link AdjustmentFront Roller Optional Front Caster Wheel Interference CheckOperating Technique Operating TipsOwner PRE-OPERATION Check List Uneven TerrainMower Removal & Storage Owner Service Owner ServiceBlocking Method Lubrication InformationDescription Frequency Belt Replacement Belt ServiceBelt Installation Blade ServiceCleaning Blade InstallationChain Shielding Blade SharpeningMowing Conditions TroubleshootingTrouble Shooting Belt Conditions Troubleshooting Dealer Service Dealer ServiceBlade Spindle Service Spindle DisassemblySpindle Installation Spindle AssemblyGearbox Repair Seal ReplacementSeal Installation Gearbox Removal from Mower Vertical Shaft Seal ReplacementHorizontal Shaft Seal Replacement Gearbox Reassembly Gearbox DisassemblyDrive Sheave Installation Gearbox InstallationJoint Disassembly Universal Joint RepairJoint Assembly Assembly Instructions AssemblyInstall Front Casters Figure Dealer SET-UP InstructionsInstall Driveshaft Install Hitch ArmsTorque Caster Arms Fill GearboxInstall Front Roller Optional Install Chain ShieldingQuick Hitch Kit Installation Optional Install Quick Hitch OptionalDealer Check Lists Dealer Check ListsPRE-DELIVERY Check List Delivery Check ListMAN0845 1/12/2011 Parts Parts IndexRD990X Main Frame Assembly Part QTY Description NSS RD990X Gearbox AssemblyRD990X Drive Shaft Assembly RD900X Blade & Spindle Assembly RD990X Chain Shielding Assembly Quick Hitch KIT Optional RD990X Front Roller Assembly OptionalSAE Series Torque Chart Bolt Torque ChartMetric Series Torque Chart AppendixAbbreviations Bolt Size ChartIndex IndexWarranty Rev /23/2005 MAN0845

RD990X specifications

The Woods Equipment RD990X is a robust rotary mower designed for heavy-duty performance in various applications, making it an ideal choice for landscapers, agricultural professionals, and property managers alike. With its superior build quality and innovative features, the RD990X stands out in the competitive market of rotary mowers.

One of the main features of the RD990X is its powerful cutting capability. Equipped with a high-performance engine, this mower is engineered to sustain tough mowing conditions, whether in dense grass, thick brush, or uneven terrain. The RD990X has a wide cutting deck that ensures efficient mowing, reducing mowing time significantly. The adjustable cutting height allows users to tailor their mowing to their specific needs, offering versatility across different landscapes.

Another notable aspect of the RD990X is its durable construction. The mower's heavy-duty steel frame is designed to withstand wear and tear, ensuring longevity even in rugged environments. The reinforced cutting deck not only provides strength but also enhances safety during operation. Additionally, the RD990X incorporates innovative technologies like blade brake systems, which provide instant stopping power to the blades when the operator disengages the mower. This feature increases safety and provides peace of mind while mowing.

The RD990X is also designed with user comfort in mind. Its ergonomic controls are easily accessible, allowing for smooth operation without straining. The mower's design allows for excellent visibility, giving operators confidence while navigating around obstacles. Enhanced maneuverability is also a highlight, enabling tight turns and precise trimming in challenging areas.

Moreover, the RD990X integrates advanced technologies such as GPS tracking and fuel efficiency monitoring, optimizing performance and operational costs. Its compatibility with various attachments expands its functionality, allowing it to perform multiple tasks beyond mowing, such as mulching and side discharge.

In summary, the Woods Equipment RD990X is a top-tier rotary mower distinguished by its powerful performance, durable build, ergonomic design, and cutting-edge technology. Whether tackling large fields or maintaining landscaped areas, the RD990X is engineered to deliver exceptional results, making it a reliable choice for all mowing needs. With its outstanding features and versatility, it holds a significant position in the market, promising both efficiency and effectiveness for users across various industries.