Woods Equipment manual Specifications, Model LF138 Model LF156

SPECIFICATIONS

Specifications will vary with tractor, tire size, hydraulic system and bucket used. The specifications are given for a loader equipped with a 84" (LF138) and 96" (LF156) material bucket, operated with an average tractor hydraulic system of 10-20 gpm with engine operating at rated PTO rpm and a control valve relief setting of 2750 psi.

		Model LF138	Model LF156
A	Maximum Lift Height	138"	156"
B Clearance with Attachment Dumped		103"	121"
C	Reach at Maximum Height	32"	36"
D	Maximum Dump Angle	50°	50°
E Reach with Attachment on Ground		85"	94"
F	Attachment Rollback Angle	35°	35°
G	Digging Depth	6"	6"
	Overall Height in Carrying Position	74"	81"
	Length of Attachment	42"	42"
	Lift Capacity to Full Height at Bucket Pin	4280 lbs.	4850 lbs.
	Lift Capacity to Full Height - 31.5" Forward of Bucket Pin	2940 lbs.	3480 lbs.
	Breakout Capacity at Bucket Pin	6410 lbs.	7140 lbs.
	Breakout Capacity - 31.5" Forward of Bucket Pin	4440 lbs.	4990 lbs.
	System Pressure Tested	2750 psi	2750 psi
	Recommended Hydraulic Flow	10-20 gpm	12-25 gpm
	Recommended Tractor PTO Horsepower	65-105 hp	85-140 hp
	Lift Cylinder Bore	2.76"	2.95"
	Bucket Cylinder Bore	2.76"	2.76"

BUCKET	HEAPED CAPACITY	WEIGHT
84" QA	28.7 cu. ft.	690 lbs.
84" Pin	28.7 cu. ft.	660 lbs.
96" QA	33.0 cu. ft.	760 lbs.

4 Introduction MAN0556 (9/121/2007)