Woods Equipment LF138, LF156 manual Backfilling, Handling Objects, Forklift Operation

Page 17

Figure 20. Bucket Tilted too Far

Backfilling

1.Approach the pile with a flat bucket, Figure 21.

Figure 21. Backfilling Correctly

2.Do not use the bucket in the dump position for bulldozing. This method will impose severe shock loadings on the dump linkage, the bucket cylinder, and the tractor, Figure 22.

Figure 22. Incorrect Bucket Position for Backfilling

3.Leave dirt in the bucket because dumping on each pass wastes time.

4.Operate at right angles to the ditch. Take as big a bite as the tractor can handle without lugging down.

5.Leave dirt that drifts over the side of the bucket for final clean-up.

6.Pile dirt on the high side for easier backfilling on a slope.

HANDLING OBJECTS

„AVOID INJURY OR DEATH FROM FALLING BALES AND OTHER OBJECTS:

Do not carry hay bales, logs, fence posts, stones, or any other loose objects that can roll, shift, or fall from a raised bucket and crush operator or bystanders.

Do not handle round bales unless loader is equipped with approved bale handling attach- ment.

Handle raised loads with caution.

Carry loads low and drive slowly.

Figure 23. Avoid Falling Loads

FORKLIFT OPERATION

„To avoid injury or death from bale rolling back down loader, do not handle round bales with the pallet fork.

CAUTION

„To help prevent tractor/loader instability, never exceed the capacity of the tractor/loader used with the pallet fork. To increase stability, adjust tires to maximum possible width.

Use the pallet fork to move pallets, bulk bins, crates, boxes and hampers.

Do not use for shiftable loads such as logs or poles. Do not use for digging rocks or lifting concrete slabs.

MAN0556 (9/21/2007)

Operation 17

 

 

Image 17
Contents Loaders To the Owner IntroductionTo the Dealer General Information Table of ContentsModel LF138 Model LF156 SpecificationsAttachments Approved for USE on LF138 & LF156 Loaders Lift Capacity & Breakout VS PressureSafety Rules SafetyInstallation TrainingLines „ Avoid Injury or Death from PowerOperation „ Avoid Injury or Death from Rollover Accidents MaintenanceStorage Safety Serial Number Plate Safety & Instructional DecalsPN 1025148A Be CarefulOperation „ Avoid Injury or Death from Power LinesOperation Tractor PreparationLoader Operation Connect Bucket or Attachment Using Quick Attach CouplerLifting Load Filling BucketCarrying Load Operating on a SlopeLowering Bucket Dumping BucketOperating with Float Control Loading from a BankBackblading Peeling and ScrapingLoading Low Trucks or Spreaders from a Pile Forklift Operation BackfillingHandling Objects Picking Up Round Bale on Slope with a Grapple Grapple OperationPicking Up a Round Bale with Grapple Removing Hay & Silage from a Pile with Grapple Fork Transporting a Round Bale with GrappleDumping into Truck, Wagon & Spreaders Bale Spear OperationCleaning Owners Responsibility PRE-OPERATION Check ListOwner Service Owner ServiceProblem Possible Cause Solution TroubleshootingTroubleshooting Troubleshooting Dealer Check Lists Dealer Check ListsPRE-DELIVERY Check List Delivery Check ListDealer Service Dealer ServiceCylinder Service Cylinder RepairBucket Cylinders Grapple Cylinder Bearing Locations Replaceable Bearings Pivot Bearing ReplacementDealer Service Assembly AssemblyAssembly Instructions Dealer SET-UP InstructionsQuick Attach Coupler Installation Optional on LF138 Pin-On Bucket Installation LF138 OnlyBucket Level Indicator Installation Bucket Level Indicator AdjustmentGrease Loader Grapple Installation OptionalBucket Tooth Installation Optional Install Hydraulic HosesInstallation InstallationAttach Loader to Tractor Remove Loader from TractorConnect Loader Supply Hoses to Loader Grapple Assembly OptionalVerify Control Movements Remove GrappleInstall Grapple Parts LF138 & LF156 Loader AssemblyPart QTY Description LF138 & LF156 Loader Assembly Parts ListPIN-ON Bucket Assembly LF138 only Quick Attach Bucket AssemblyOptional for LF138 Quick Attach CouplerLF156 Hydraulic Hose Routing & Parts ListSpanner Nut Threaded Rod Gland Complete Assembly Style Hydraulic Cylinder Seal Kits & AssemblyGrapple Optional Grapple Parts List SAE Series Torque Chart Bolt Torque ChartAppendix Metric SeriesAbbreviations Bolt Size ChartIndex IndexWarranty Warranty