CONNECT BUCKET OR ATTACHMENT USING QUICK ATTACH COUPLER
Position the hydraulic hoses so they will not be pinched when connecting the attachment.
The quick attach coupler handle should be in the unlocked (open) position with lock pins retracted, Fig- ure 1.
Handle
Open 
DP1
Figure 1. Quick Attach Coupler Handle - Unlocked
Move to the operator seat, fasten seat belt, and start engine.
Lower loader lift arms to their lowest position.
Carefully move and align the quick attach coupler to the bucket or attachment. The top of the quick attach coupler must completely engage the attachment or bucket hook, Figure 2.
Roll the attachment coupler into the attachment flange so the coupler handle can be engaged.
Figure 2. Connecting Bucket or Attachment to Loader
Shut off the engine, set brake, remove key, and remove seat belt. Dismount the tractor.
Move the attachment coupler handle to the locked (closed) position. The lockpins must be completely extended and secured into the retaining slots, Figure 3.
Attachment coupler handles must always be rotated to LOCK POSITION to prevent coupler latch from disengaging and attachment from falling off.
Connect hydraulic hoses to loader auxiliary quick cou- plers (optional).
Handle
Closed
Figure 3. Attachment Coupler Handle - Locked
LOADER OPERATION
Do not allow bystanders in the area when oper- ating, attaching, removing, assembling, or servic- ing equipment.
The loader should be operated with the tractor engine running at a safe RPM. Excessive speeds are danger- ous, and may cause bucket spillage and unnecessary strain on the tractor and loader.
MAN0556 (9/21/2007) | Operation 13 |
|
|