C O N T R O L S
Controls (see figure 5)
1.Three pt. Hitch Connection: Mounts chipper to tractor 3 pt. hitch. Connect direct for category 1.
2.PTO Shaft: Connects chipper to tractor PTO shaft. Avoid driveline angles over 20 degrees on PTO shaft when unit is in use.
3.Drive Belt Shield: Never remove shield while machine is running.
4.Chipper Chute: Feeds materials to the chipper blades for chipping.
5.Leg Stands: Never move machine unless legs are in UP position and clear the ground.
6.Rotor Access Cover: Tilts up to remove chipper blades and to service rotor assembly.
7.Discharge Tube: Chipped materials will exit through this tube. Tube is adjustable 360 degrees.
8.Adjustable Chipping Anvil: Adjusts to vary the size of chips.
9.Rotor Shaft Bearing Cover: Rotor shaft has lock assembly to lock rotor in place while moving.
PTOModel
Controls
Figure5
7
6
4
9
8
3
21
5
10