DRIVE CONTROL ADJUSTMENTS (CONTINUED)
LEFT SIDE SHOWN
Once both hydro units are pulling equally, make your final control handle adjustment with this ball linkage. Whichever handle is going the farther forward, lengthen the linkage on that side until the handles are straight across when mower is traveling in a straight line. If a lot of adjustment is needed, shorten the linkage on the opposite side for half of the adjusting.
OVERVIEW OF DRIVE CONTROL LINKAGE
RIGHT SIDE SHOWN
Right side control handle
Pivot point for control handle movement
Pivot point
Forward and reverse control on hydrostat
Adjustment threads on control rod
9