DECK BELT REPLACEMENT
ENGINE TO DECK BELT
•Lower the deck to lowest setting
•Loosen tension on tension idler
•Remove worn or damaged belt
•Using part# 10263 belt, route it around the engine pulley as shown in the diagram.
•Retighten the tension idler and check the operation
Belt coming from the electric clutch will be routed around this idler pulley on the outside.
As belt leaves the previous idler pulley it will be routed around this flat idler pulley to the inside and then forward to the deck.
Tension on belt can be adjusted by tightening or loosening this nut.
DECK CROSS BELT
•Remove the belt covers
•Remove the engine to deck belt from deck pulley
•Loosen the tension to the tension idler
•Remove the worn or damaged belt and replace with part# 5058 belt
•Reinstall the engine to deck belt and retighten both tension idlers
12