Maintenance
3.3 Printhead Replacement (203 DPI)
Removal:
1. Turn off the printer.
2. Unlatch the printhead carrier assembly. Loosen the printhead screw until it is free from the printhead. Carefully remove the printhead from the printhead carrier assembly.
3. Remove the printhead cables from the back of the printhead.
Figure 3-4 Disconnecting the Printhead Cable
Replacement:
1. Connect the printhead cables to the new printhead.
2. Position the printhead on the printhead carrier assembly and tighten the printhead screw.
3. Ensure that the printhead cable is not pinched and that the printhead is clean.
Ovation™2 | 31 |
