Swisher manual Carburetor Fuel Solenoid, Used on ZT2350, Used on ZT18542

Page 12

CARBURETOR FUEL SOLENOID

USED ON ZT2350

Black wire goes to engine ground.

Gray wire goes to the engine plug, then on to the ignition switch where it receives power to activate the fuel shut off valve.

Fuel shut off solenoid is a Briggs part and is available through them only.

USED ON ZT18542

Fuel shut off solenoid is a Briggs part and is available through them only.

Gray wire goes to the engine plug, then on to the ignition switch where it receives power to activate the fuel shut off valve.

Black wire goes to ground.

9

Image 12
Contents Repair Manual Page Table of Contents If Engine WON’T Crank Always Check Fuse FirstBattery Ground Connection AT Engine Engine Stalls When PTO is Engaged Engine Cranks but WON’T StartIf PTO Clutch will not Engage Wiring Diagram Hour Meter not OperatingWire Identification AT Switches Ignition Switch PTO Switch PlugStarter Solenoid Wire Identification on ZT18542 Wiring Harness to Engine Plug ConnectionWiring Harness Plug to Engine Wire Identification on ZT2350 Carburetor Fuel Solenoid Used on ZT2350Used on ZT18542 Battery Charging Systems Used on the ZT2350Adjusting the Drive Controls Adjustment of SteeringTracking Adjustments Replacement of the Hydro Unit Repairing or Replacing Blade Driver Belt Replacement Routing Clutch drive belt replacementReplacement Parts Quick ReferenceSeries Swisher Mower & Machine CO. INC Corporate Drive