Swisher Lawn Mower Ignition Switch Wiring and Connections Guide

Page 9

WIRE IDENTIFICATION AT SWITCHES

3623 IGNITION SWITCH

One gray wire goes to the PTO switch and the other goes to the hour meter

One black wire goes to PTO switch and the other goes to the engine plug

Green wire goes to PTO switch

Red wire goes to fuse and on to battery positive at the solenoid terminal.

One white wire goes to clutch and other one goes to ground.

STARTER SOLENOID

Heavy red cable goes to the starter.

Red wire goes through fuse and onto ignition switch.

Green wire goes to neutral switches and on to the ignition switch.

Heavy red cable goes to the positive post of the battery.

Red wire goes to engine plug.

Green wire with orange stripe goes to the ground.

Black wire goes to the ignition switch.

Green wire goes to the ignition switch.

Gray wire goes to the ignition switch.

PTO SWITCH PLUG

Black wire goes to the seat switch.

Green wire goes to the neutral switches.

Brown wire goes to the clutch.

6

Image 9
Contents Repair Manual Page Table of Contents Always Check Fuse First If Engine WON’T CrankBattery Ground Connection AT Engine Engine Cranks but WON’T Start Engine Stalls When PTO is EngagedIf PTO Clutch will not Engage Hour Meter not Operating Wiring DiagramWire Identification AT Switches Ignition Switch PTO Switch PlugStarter Solenoid Wire Identification on ZT18542 Wiring Harness to Engine Plug ConnectionWiring Harness Plug to Engine Wire Identification on ZT2350 Carburetor Fuel Solenoid Used on ZT2350Used on ZT18542 Used on the ZT2350 Battery Charging SystemsAdjustment of Steering Adjusting the Drive ControlsTracking Adjustments Replacement of the Hydro Unit Repairing or Replacing Blade Driver Clutch drive belt replacement Belt Replacement RoutingQuick Reference Replacement PartsSwisher Mower & Machine CO. INC Corporate Drive Series